Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Santa Rosa, CA | Bradford Remodeling
Ameristar cabinet and construction service in Santa Rosa comes down to one thing: knowing which parts of a 40-year-old cabinet box are worth saving and which ones aren’t. Bradford Remodeling, a Santa Rosa General Contractor, provides independent Ameristar service across Santa Rosa, not manufacturer-affiliated, with OEM-spec parts and a straight answer on whether to reface or replace. Most Santa Rosa calls we get combine a cabinet reface with a tub-to-shower conversion, because the housing stock ages out all at once. Call (903) 568-7222 to get a written price before any work starts.
Why Santa Rosa Residents Choose Us for Ameristar Service
Ameristar is one of the most widely installed entry-level cabinet lines in Sonoma County. Our crew has assembled, hung, shimmed, and refaced hundreds of its door-and-drawer-box systems in Santa Rosa homes, from Bennett Valley ranchers to Rincon Valley subdivisions. We know which Ameristar lines hold up and which ones don’t. Owner Curtis Lane trained in construction technology at Los Angeles Trade-Technical College and spent two decades doing foundation work to finish carpentry before running Bradford Remodeling. That means when we tell you a thermofoil door is done, we’re telling you from experience, not a guess. We’re an independent remodeler, so our loyalty is to the install doing its job in your house, not to a manufacturer program. For the full range of what we do, see our Ameristar sales & service page.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Santa Rosa
- Thermofoil door skins peeling at the edges. Ameristar Wakefield and Elite thermofoil doors delaminate when kitchen ventilation is poor. We see this constantly in older Santa Rosa homes with windowless galley layouts where steam and grease sit on the cabinet faces. The fix is either a door-front replacement with higher-grade thermofoil or a full reface, depending on the box condition.
- Particleboard sink base swelling. The original Ameristar Concord boxes in 1950s-70s Santa Rosa housing stock used particleboard. A slow plumbing leak soaks the box, the rails sag, and the doors stop lining up. If the box is soft, refacing is throwing money at a failing core. We replace the sink base with a plywood-box Ameristar Denali unit and match the surrounding fronts.
- Hairline cracks at stile and rail joints on painted MDF doors. Santa Rosa’s hot, dry summers followed by damp winters make painted MDF doors expand and contract. Cracks show up at the joints, and ghosting appears around hinges. We replace the door fronts with a more stable material when the boxes are still square.
- Drawer runners binding from seasonal moisture swing. Sonoma County’s coastal-influenced weather patterns mean cabinet boxes absorb and release moisture all year. Side-mount slides bind, and drawer glides wear unevenly. We swap Ameristar hinges, soft-close dampers, and drawer glide sets with OEM-spec or higher-grade aftermarket parts.
- Cast-iron tub surrounds hitting end-of-life alongside the cabinets. Many Santa Rosa ranch homes from the 1960s and 1970s have original Ameristar cabinets in the kitchen and original cast-iron tubs in the bath. When both fail at once, we scope the cabinet reface and the tub-to-shower conversion together, which saves you a second mobilization and a second permit cycle.
Ameristar Service in Santa Rosa: What Local Conditions Mean for Your Cabinets
Santa Rosa has a huge inventory of mid-century ranch homes and 1970s-80s builder subdivisions where the original Ameristar cabinets and cast-iron tub surrounds are now hitting end-of-life at the same time. That’s the local condition that shapes everything we do here. Most of our Santa Rosa calls combine a cabinet reface with a tub-to-shower conversion in the same project scope, because the kitchen and the bath were built in the same year, with the same materials, and they fail in the same decade. That pairing is far less common in neighboring Bay Area cities with newer housing stock. In the Bennett Valley area specifically, our crew pulled a 1980s Ameristar Concord kitchen where the thermofoil doors had peeled and the sink base was soft to the touch. We refaced the upper boxes, replaced the sink base with a plywood-box Ameristar Denali unit, re-clad the remaining fronts with a higher-grade thermofoil, and set new quartz tops and a tile backsplash in the same week. The homeowners got an updated kitchen for a fraction of a tear-out, and the failing core under the sink was corrected instead of covered up. That’s what we mean when we say we know which parts to save. For our full service footprint, visit our Santa Rosa service area page.
Ameristar Models & Products We Service in Santa Rosa
We work on the full Ameristar lineup installed across Santa Rosa. The Concord line, raised-panel oak and maple, is the builder-grade staple in tract homes here. The Wakefield line, shaker-style thermofoil and painted MDF doors, shows up in mid-range kitchens. The Denali line, all-plywood box construction, is the upgrade we recommend when a box needs replacing. We also service the Elite and Cambria-style MDF melamine cabinets common in rental turnovers. Our approach on parts: we swap hinges, soft-close dampers, drawer glide sets, and door fronts with OEM-spec or higher-grade aftermarket whenever the boxes are still solid. That saves real money versus a full tear-out. When the cabinet boxes or shower substrate show rot, we tell you straight and steer you toward a full replacement tied to the proper sub-services.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Santa Rosa
Here’s what Ameristar-related work costs in Santa Rosa, in real numbers:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the number is box condition. If the Ameristar boxes are solid, a reface runs the low end of the cabinet range. If the sink base is soft or the boxes are out of square, replacement raises it. A free estimate from us includes a written line-item price, so there are no numbers that move at the door. Call (903) 568-7222 to schedule one.
Serving Santa Rosa, CA - Our Local Coverage Area
We’re based in the Santa Rosa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Santa Rosa
Yes, when the boxes are still square and dry. We replace door fronts, hinges, and drawer glides with OEM-spec or higher-grade aftermarket parts. If the sink base or any box is soft from moisture, refacing that section is a waste of your money, and we’ll tell you before you spend it. Call (903) 568-7222 for an exact assessment.
Thermofoil is a vinyl skin bonded to an MDF core. When heat and moisture get to the edges, the bond fails and the skin lifts. Kitchen Remodeling in Santa Rosa often involves kitchens with poor ventilation, especially windowless galley layouts in older homes, which accelerate this. The fix is replacing the door fronts with a higher-grade thermofoil or painted wood, depending on your budget and the box condition.
We do. Ameristar vanity bases and door fronts work in bathrooms, and we install them alongside walk-in shower or tub-to-shower conversion work. If you’re doing a bath remodel in Santa Rosa, we can scope the vanity and the shower in the same visit.
Cabinet installation in Santa Rosa runs $4,000 to $13,000 depending on box count, material grade, and whether we’re installing new or refacing existing. A reface on solid Ameristar boxes lands toward the low end. A full install with plywood-box Denali units runs higher. Call (903) 568-7222 for a written quote, estimates are free.
Yes, and we do it regularly. Santa Rosa’s mid-century housing stock ages out the kitchen and bath at roughly the same time, so we scope the cabinet reface or replacement and the tub-to-shower conversion together. One visit, one written price, one crew. Call (903) 568-7222 to book the assessment.
Service Areas Near Santa Rosa
Bradford Remodeling runs Ameristar service throughout Sonoma County and the wider North Bay. We take calls from Petaluma, Rohnert Park, Windsor, Sebastopol, and Healdsburg, plus the broader San Francisco metro. Further south, we offer Ameristar service in Rancho Cucamonga and Ameristar service in Oceanside for Southern California clients.
Book Your Ameristar Service in Santa Rosa Today
Call (903) 568-7222 to schedule your free estimate on Ameristar cabinet installation, refacing, or a combined kitchen-and-bath scope. A live person answers, 24/7. You’ll get a written price before any work starts, and a 365-Day Done Right Promise after. Straight number, real scope, no surprises at the punch list.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Santa Rosa and Sonoma County since 2004.
