Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The Los Angeles Owner’s Guide
If you’re planning a home addition or ADU and want KraftMaid cabinetry specified into the build, a full project in Los Angeles typically runs $53,100 to $153,400 depending on square footage, foundation work, and finish level. We stock and install KraftMaid cabinetry as part of our additions and ADU builds, and we can usually have your KraftMaid order confirmed and into our production schedule within a week of the final site measure. Most Los Angeles homeowners reach out to us after they’ve priced the project piecemeal and realized the cabinetry package alone, if ordered wrong, can set the whole job back six to eight weeks.
What owners typically discover: they bought KraftMaid boxes from a big-box retailer, the order came in with wrong door fronts or a missing pantry cabinet, and now they’re stuck holding components that don’t match their build timeline. That’s the moment they call us. We re-spec the order against the actual rough-in dimensions, and if the job is still open, we install what’s correct and handle the return on what isn’t.
Key Takeaways:
- Full home additions and ADUs with KraftMaid cabinetry in Los Angeles: $53,100 – $153,400
- We confirm every KraftMaid part number against the actual framed opening before the order locks
- Every project gets a written price before work starts, and a 365-Day Done Right Promise after it’s done
Which KraftMaid Models This Applies To
KraftMaid’s current catalog breaks into three lines you’re most likely to see in a Los Angeles addition or ADU: Vantage, Venicia, and KraftMaid Core (sometimes sold as “KraftMaid by Masco” on older orders). Vantage is the full-custom line with extended height and depth options, Venicia is the frameless European-style line, and Core is the semi-custom workhorse most homeowners spec for ADUs because it hits the price point without giving up the finish options.
The compatibility gotcha we see constantly: KraftMaid’s wall cabinet depths are not the same across lines. Vantage wall cabinets can be ordered at 12″, 15″, 18″, or 24″ deep. Venicia runs 12″ or 16″. If you spec a 24″ deep Vantage wall cabinet next to a 16″ deep Venicia base cabinet, the reveal looks wrong and the install becomes a shimming nightmare. We check every line item against the adjacent cabinet before the order gets submitted. On the OEM-versus-aftermarket question: for KraftMaid, we almost always stay OEM. The door profile match, the finish code, and the hinge boring pattern are proprietary enough that a generic replacement door from a cabinet refacing shop looks close but reads wrong under light. If you’re replacing a single failed cabinet box after a water leak, we can match the face frame with aftermarket material, but the doors and drawer fronts stay KraftMaid.
Bradford Remodeling is an independent remodeling contractor. We are not affiliated with KraftMaid or Masco, and we don’t sell parts as a distributor. What we do is specify, order, and install KraftMaid as part of our additions and ADU builds, and we stand behind the installation with our own written guarantee.
Styles & brands we work with
Signs Your KraftMaid Home Additions & ADU Is Failing
You won’t get a “warning light” on cabinetry. What you’ll get is a slow parade of small failures that each look cosmetic but usually point to the same root cause: the original rough-in was off, or the boxes were hung without accounting for how the structure settles. Here’s what we see in Los Angeles homes:
- Doors that won’t stay closed, or slam open on their own. The cabinet is racked because the wall behind it isn’t plumb, or the frame moved after a minor foundation shift. Adjusting the hinge only masks it. The box needs to be re-shimmed or the wall framing corrected.
- Drawer slides that bind or feel gritty after a year. KraftMaid uses side-mount slides from Blum or Grass depending on the line. If the cabinet box was installed out of square by even 1/16″, the slide fights itself and wears the ball bearings flat. Replacing the slide without squaring the box destroys the new set.
- Hairline cracks along the finish at the door’s center panel. This is a veneer or paint failure from moisture cycling, and in Los Angeles it’s worse near the coast (Santa Monica, Venice, Playa del Rey) and in the hotter inland basin (the San Fernando Valley). KraftMaid’s catalyzed topcoat handles humidity, but a small finished-panel crack invites more moisture behind the finish and spreads fast.
- Adjustable shelf pins that wobble or fall out. The pin holes in the cabinet sides have been wallowed out, usually from a shelf being moved repeatedly with weight still on it. This is a box replacement issue, not a pin replacement issue.
- A cabinet box that pulls away from the wall at the top. The installer hit one stud instead of two in the mounting rail, or used drywall anchors on a load-bearing upper cabinet. In an ADU with unvented cooking, this gets worse over time as the wall cavity cycles hot and cold.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full home addition or ADU in Los Angeles with KraftMaid cabinetry specified and installed, plan on $53,100 to $153,400 for the complete project. The cabinetry package itself, depending on the line and the number of boxes, usually lands between $9,000 and $28,000 of that total. The spread is driven by a few things: whether the addition requires foundation work, how far the kitchen or bath rough-in has to move, whether we’re pulling permits (we are, every time), and which KraftMaid line you’ve selected. Vantage runs roughly 30% higher than Core for the same footprint.
What’s included, always, in writing: the written price before any work starts, the KraftMaid order confirmation with every line item listed, all rough-in, delivery coordination, installation, and cleanup. What’s also included: a signed workmanship warranty under our 365-Day Done Right Promise. If the installation fails inside that window, we come back and correct it at no charge. No exceptions, no re-quote at the door.
DIY or Call Us?
You can safely check a few things yourself: read the KraftMaid label inside the cabinet door (it’ll give you the line, the finish code, and the manufacture date), measure the boxes against the opening, and look for the pull-away or racking signs above. What you shouldn’t do is hang upper cabinets or re-square a built-in without a level, a stud finder that reads true, and a second set of hands. A filled 36″ upper cabinet can weigh 180 pounds. If the mounting rail isn’t into two studs and the box isn’t shimmed level on all three axes, that cabinet will pull out of the wall or sag within a year.
We’d also caution against re-ordering a single KraftMaid component through a retailer and expecting it to match your existing finish. Finish codes change, and a box built today won’t always match one built three years ago. We handle the re-order and verification so you’re not stuck with a mismatched door front. If you’re looking at a failed install or a spec that went sideways, call us at (903) 568-7222. Straight number, real scope, no surprises at the punch list.
FAQs
A properly installed KraftMaid box with a catalyzed topcoat will last 20 to 25 years in most of Los Angeles County before the doors show meaningful wear, but the failure we see most often isn’t the cabinet, it’s the install. Racked boxes, out-of-square slides, and moisture intrusion at the finish edges cut that lifespan in half. Our workmanship warranty stands for a full year, and we’ve seen KraftMaid boxes from the early 2000s still square and true in homes across the basin.
Generally, yes for hardware and no for structural failure. Hinges, slides, and shelf pins are replaceable and we can match them to the exact KraftMaid part number in most cases. A racked box, a wallowed-out pin hole, or a delaminated door panel needs the component replaced, not patched. Call us at (903) 568-7222 and we’ll tell you which one you’ve got before you spend a dollar.
In a new addition or ADU, the KraftMaid cabinet install typically takes three to five working days, including the crown, toe-kick, and hardware mounting, assuming the rough-in is square and the boxes arrived complete. We stage the order, verify every line item against the packing slip before we open a box, and don’t call the job done until the doors are adjusted and the hardware is tight.
We keep KraftMaid-compatible hinges, slides, shelf pins, and touch-up kits on our trucks because those are the parts that fail most in the field. Full cabinet boxes, doors, and drawer fronts are made-to-order from KraftMaid and can’t be stocked. We handle the ordering, the lead-time tracking, and the return on anything that arrives wrong.
Written by Curtis Lane, Owner, Bradford Remodeling at Bradford Remodeling, serving Los Angeles and nearby areas.
