Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Fence Installation: The Los Angeles Owner’s Guide
CertainTeed fence installation in Los Angeles typically runs $4,130 to $10,620 for a complete post-and-panel or post-and-rail system, with most single-run replacements landing between $5,900 and $8,260. That’s the installed price: materials, tear-out of the failed section, post setting, and haul-away. We stock CertainTeed-compatible rails, posts, and panels on our trucks, so we can usually match your existing line and color the same week you call.
Most Los Angeles homeowners discover they need us when a post starts leaning after a wet winter, or a panel cracks at the bracket after years of sun exposure. CertainTeed vinyl and composite fencing is built for a long service life, but the hardware and post footings take the real beating out here. When the connection between post and panel fails, the whole section starts moving, and that’s the call we get.
What you should know up front: Bradford Remodeling is an independent contractor, not affiliated with CertainTeed. We install their products because the specs are consistent and the warranty documentation is straightforward. Anything we quote, you get in writing before work starts.
Which CertainTeed Models This Applies To
CertainTeed’s fence lineup breaks into a few distinct lines, and the part you need depends entirely on which one is in your yard. The Bufftech series is the most common in Los Angeles: it includes the Coventry, Chesterfield, Brookline, and Bel-Air styles, each with different panel profiles and post dimensions. The EverNew line runs slightly thinner in the panel wall, which matters when you’re matching a replacement section to an existing run. There’s also the SimTek eco-composite line for heavier, more impact-resistant installations, though we see far fewer of those in residential L.A. backyards.
The fastest way to identify your line is to measure the panel thickness at the top rail. Bufftech panels typically sit at 1.5 to 2 inches thick at the profile peak, while EverNew runs closer to 1 to 1.25 inches. The post dimensions will also tell you what you’re working with: most residential CertainTeed posts are 4×4 or 5×5 sleeves over a structural wood or steel core. If you don’t know what you have, we can identify it from a photo or a quick site look.
On the OEM-versus-aftermarket question: for CertainTeed specifically, we recommend OEM panels and rails whenever the fence is still in production. The color codes and profile locking channels are unique to each series, and a generic aftermarket panel rarely seats correctly. For posts and hardware, a quality aftermarket equivalent usually performs identically, because the load transfer happens in the footing and the structural core, not the vinyl sleeve itself.
Styles & brands we work with
Signs Your CertainTeed Fence Installation Is Failing
- Post lean at the base. The vinyl sleeve is fine, but the footing underneath has shifted or the wood core has rotted at grade. In Los Angeles, this is most common after heavy rain seasons in neighborhoods with clay-heavy soil, like parts of the San Fernando Valley.
- Panel sag between posts. The top rail has lost its lock into the post bracket, usually because years of thermal expansion have worn the channel. You’ll see the panel start to bow in the middle, and it gets worse each summer.
- Cracked or chalked panel surface. Ten to fifteen years of direct Southern California sun will break down the outer capstock on cheaper lines. The panel won’t fail structurally right away, but it’s the first visible sign the material has aged past its service window.
- Loose or rattling panels in wind. The locking tabs that hold the panel into the post have sheared off. Santa Ana winds in places like Porter Ranch or Granada Hills will expose this fast, because the panel acts like a sail.
- Gate no longer latches square. The gate post has shifted out of alignment, either at the footing or at the hinge mount. This is the most common failure we see in Los Angeles, and it’s almost always a footing issue, not a hinge issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Our installed pricing for CertainTeed fence work in Los Angeles breaks down like this:
| Scope | Installed Price Range |
|---|---|
| Single post replacement (including footing) | $590 – $1,180 |
| Single panel replacement | $470 – $945 |
| Partial run (10 – 25 linear feet) | $2,360 – $5,310 |
| Full fence replacement (50 – 100 linear feet) | $4,130 – $10,620 |
The spread comes down to three things: linear footage, whether footings need to be re-poured or can be reused, and access. A fence on a flat, open property line with clear access from the street is a straightforward job. A fence on a hillside in Echo Park or Silver Lake, where we’re setting posts into decomposed granite with limited staging room, runs toward the upper end. Every quote includes tear-out, disposal, materials, labor, and a written line-item breakdown. No number moves once the scope is signed.
DIY or Call Us?
You can safely check the obvious things yourself: wiggle the post to see where the movement is, look at the footing for cracking, and check whether the failing panel’s lock tabs are intact. That tells you what you’re dealing with and helps us give you an accurate phone estimate. What you should not do is dig out a failed post and try to reset it with a bag of quick-set from the home center. A fence post in Los Angeles needs to be set below grade to hold against wind load and shifting soil, and a badly set post just fails again in the next rain cycle.
This is not high-risk work like a garage spring, so we’re not going to wave you off for safety reasons. But the most expensive thing we see in this trade is a homeowner who “fixed” a post with a two-foot hole and some gravel, then paid us to redo it properly six months later. If you want it straight the first time, call (903) 568-7222 and we’ll give you a written number.
FAQs
A properly installed CertainTeed vinyl fence in Los Angeles lasts 20 to 30 years, with most Los Angeles installations landing around 25. The panel material is UV-stabilized, but the limiting factor here is usually the structural core and hardware, which wear out in 15 to 20 years in our dry, hot climate. Call (903) 568-7222 if you want us to assess the condition of what you have.
Yes, most single-post and single-panel failures can be repaired without replacing the whole run. As long as the surrounding sections are still structurally sound and the color match is available, a targeted repair is the cheaper, cleaner fix. Call (903) 568-7222 and we’ll tell you honestly whether repair or replacement makes more sense.
Most single-section replacements and post resets are done in one day, including footing work and cleanup. A full fence replacement of 50 to 100 linear feet takes two to three days, depending on access and how many footings need to be re-poured. We’ll give you a specific schedule in the written quote before work starts.
We stock common Bufftech and EverNew rails, panels, and post sleeves on our trucks, along with the structural cores and hardware. If your line is an older color or a discontinued profile, we’ll source it through our supplier network and confirm lead time before you commit to anything. We also stock parts for other brands we service, including KraftMaid, Cambria, and Silestone.
Written by Curtis Lane, Owner, Bradford Remodeling at Bradford Remodeling, serving Los Angeles and nearby areas.
