Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Los Angeles Owner’s Guide
We install ES Windows-compatible fence systems in Los Angeles for $4,130 to $10,620, with most jobs done in two to four days once materials land. That price includes tear-out of the old fence section, new ES Windows posts and panel hardware, concrete footing work where needed, and haul-off of everything we remove. The way most Los Angeles homeowners discover they need this is the same every time: a gate stops latching, a fence section starts leaning after a rain, or a window panel pulls loose from its frame and suddenly the whole run looks off-plumb.
Fence installation around ES Windows products isn’t just about setting posts. These are engineered window-and-fence systems where the fence section typically butts directly against the window frame or sits within a few inches of it. When the fence settles or the posts heave, the first thing that shows stress is the window-to-fence joint. We’ve replaced enough of them across Los Angeles, from Westchester up through Sherman Oaks, to know the failure points by heart. Curtis Lane has kept Bradford Remodeling’s scope of work on these jobs deliberately tight: we quote the fence, we quote the hardware, and we tell you in writing whether the window itself needs any adjustment before we touch anything.
Which ES Windows Models This Applies To
ES Windows makes a few families of fence-paired window units, and the fence installation details change by series. If you’ve got the ES Windows 700 Series sliding glass wall, the fence channel is typically a 2-1/2-inch top rail that slides into a receiving bracket mounted on the window’s exterior jamb. The 500 Series fixed-panel units use a different post profile, a 3-inch square aluminum post with a removable glazing bead that the fence panel clips into. Most of what we see in Los Angeles homes from the 1980s through early 2000s is the 700 Series, but we’ve done enough 500 Series jobs in places like Torrance and Lakewood to keep both post profiles on the truck.
Here’s the compatibility gotcha: the fence panel width is set by the window’s rough opening, not by the fence run itself. Homeowners sometimes measure the fence line and order a panel that doesn’t match the window jamb slot, and the whole thing sits crooked from day one. Before we quote, we verify the window model off the label on the inside of the frame, then measure the receiving channel to the sixteenth of an inch. That measurement, not the model number alone, is what determines the right part. We carry OEM ES Windows fence hardware for both series and a quality aftermarket equivalent at roughly 60 to 70 percent of OEM cost. We tell you both prices and let you decide.
Styles & brands we work with
Signs Your ES Windows Fence Installation Is Failing
- The fence panel pulls away from the window frame. This is almost always a footing issue, not a window issue. The post settles, the panel tilts, and the gap at the jamb opens up. If you catch it early, we can sometimes shim and re-secure. If the post has dropped more than 3/8 inch, it’s a re-set.
- The gate drags or won’t latch. Los Angeles clay soil expands in wet winters and shrinks in dry summers. That seasonal movement shifts the gate post just enough to throw the hardware off. We re-hang gates on a new post footing and set the latch to the square, not to the way the gate hangs that day.
- Water stains below the fence-to-window seam. The factory seal between fence channel and window jamb fails over time. Once that channel seal is compromised, water runs down the back side of the fence panel and pools at the bottom rail. The fix is a new channel gasket, but only after we’ve confirmed the window’s own flashing isn’t the real leak.
- You can rock the fence post by hand. A properly set post shouldn’t move. If it does, the concrete footing is cracked or the post base was buried too shallow. In Los Angeles, where we don’t have deep frost, some contractors short-cut the footing depth. We go 24 inches minimum for any post that carries a window-paired fence load.
- The window itself sticks or drags. When a fence post leans into the window frame, the window’s operating sash starts binding. This isn’t a fence problem anymore, it’s a window-alignment problem. We check the window’s plumb and square before we re-set any post near it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For ES Windows fence installation in Los Angeles, our installed pricing runs $4,130 to $10,620. The spread comes down to three things: how many feet of fence we’re rebuilding, whether we’re reusing your existing window channel or replacing it, and what the footings look like once we start digging. A straight 20-foot run with two posts and good soil comes in near the bottom of that range. A 50-foot run with a gate, four posts, and clay soil that needs deeper footings lands near the top.
| Scope | Typical Installed Range |
|---|---|
| Short run, 20-30 linear feet, 2 posts, no gate | $4,130 – $5,900 |
| Mid run, 30-45 linear feet, 3 posts, one gate | $5,310 – $8,260 |
| Long run, 45-60 linear feet, 4+ posts, gate, window channel replacement | $8,260 – $10,620 |
Every quote includes parts, labor, concrete, hardware, removal, and disposal. There’s no line item that shows up later that wasn’t on the written price. If we hit an unexpected footing condition once we’re in the ground, we stop, show you what we found, and hand you a written change order with a firm number before we proceed. That’s The Garrison Standard, and it applies to every ES Windows fence job we do in Los Angeles. The work itself is covered by our 365-Day Done Right Promise: if anything fails inside a year, we come back and fix it at no charge.
DIY or Call Us?
There are a couple of things you can check yourself. Confirm the window model from the label inside the frame. Look at the fence-to-window seam and note whether the gap is even top to bottom. If the gap is uneven, don’t start tightening bolts or shimming anything. ES Windows fence systems carry real load through their posts, and a homeowner with a pry bar and good intentions can snap a window jamb or crack a glass panel faster than they’d think. The dangerous part of this job isn’t dramatic, it’s the geometry: a fence panel under tension that releases when you remove the wrong fastener can swing hard. We’ve seen a panel take out a window.
If the post is solid, the fence is plumb, and the only problem is a loose latch, that’s a hardware swap you can handle. If the post rocks, the panel leans, or the window binds, call us. Straight number, real scope, no surprises at the punch list. Our crew in Los Angeles is background-checked, uniformed, and shows up with the parts on the truck. Call (903) 568-7222 and we’ll get you a written price.
FAQs
We warranty our fence work for one year, but a properly set ES Windows fence with new concrete footings in Los Angeles typically lasts 15 to 25 years before the post hardware or channel gasket needs attention. The window-to-fence seam seal is the first thing to go, usually around year 10 to 12, especially on south- and west-facing runs that take full afternoon sun. If you replace that channel gasket at the first sign of staining, the underlying fence structure keeps working. Call (903) 568-7222 and we’ll inspect what you have.
Yes, if the posts are still true and the issue is a failed channel gasket, a loose latch, or a single cracked post base. We repair ES Windows fence systems in Los Angeles all the time without tearing out the full run. What we won’t do is patch over a failing footing or shim a post that’s already moving, because that repair fails again inside six months and we’d rather you not pay for the same problem twice. For an exact price on a repair versus a replacement, call (903) 568-7222.
Most ES Windows fence installs in Los Angeles take two to four days once we’re on site. That includes pulling the old fence, digging and pouring new footings, setting posts, hanging the fence panels, and re-sealing the window channel. Concrete needs a day to set before we load the panels onto the posts, and we schedule the work so you’re never left with an open fence line overnight unless the original fence was already down. We’ll give you a schedule in writing before we start.
We stock the common ES Windows fence hardware on the truck: 700 Series and 500 Series post brackets, channel gaskets, gate hinges, latch sets, and the 3-inch square post profile for the 500 Series. For OEM full fence panels, we order through our supplier with a lead time of 5 to 10 business days in the Los Angeles area. If you want the aftermarket equivalent, that’s usually in our shop within 3 days. We’ll lay out both options and prices in your written quote. Call (903) 568-7222 to get one started.
Bradford Remodeling is an independent installation and remodeling contractor. We are not affiliated with ES Windows or its distributors. We also install and service products from KraftMaid, Cambria, and Silestone, among other documented brands.
Call (903) 568-7222 for a free estimate on ES Windows fence installation in Los Angeles. A live person answers.
Written by Curtis Lane, Owner, Bradford Remodeling at Bradford Remodeling, serving Los Angeles and nearby areas.
