Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Driveway & Pavers: The Los Angeles Owner’s Guide
Quikrete driveway and paver work in Los Angeles typically runs $8,260 to $21,240 for a full paver driveway installation, and $4,130 to $12,980 for a paver patio. Those are installed prices, including substrate prep, base material, sand, pavers, and labor. Most Los Angeles homeowners discover their Quikrete surface is failing when they notice a sunken paver near the driveway apron, standing water that never used to pool, or edge pavers that have started drifting outward into the lawn. We keep Quikrete-compatible pavers and the right base materials on the truck for most repairs, which means we can usually diagnose the failure and quote the fix in one visit.
Key takeaways:
- Installed paver driveway in Los Angeles: $8,260 – $21,240
- Most failures trace to the base, not the paver itself
- We stock common Quikrete paver sizes and base material locally
- Bradford Remodeling is an independent contractor, not affiliated with Quikrete
Which Quikrete Models This Applies To
Quikrete doesn’t sell pavers under a single model number the way an appliance maker does. What you’ll find at Los Angeles masonry yards and big-box stores is Quikrete’s paver base products, polymeric sand, and concrete mix lines, paired with pavers from manufacturers like Belgard or Unilock. The compatibility question is really about the base system under the pavers, which is where Quikrete products come in.
The most common setup we see in Los Angeles is a Quikrete Paver Base panel or compacted gravel base, a one-inch sand setting bed, and the pavers themselves. If you’re holding a bag or a receipt, look for the product name printed on the bag: Quikrete Paver Base, Quikrete All-Purpose Sand, or Quikrete PowerLoc Jointing Sand are the three we match against most often. The gotcha is that Quikrete PowerLoc polymeric sand has different cure times depending on temperature, and Los Angeles heat can set it faster than the bag says. We adjust our installation sequence for that.
When it comes to the pavers themselves, OEM Quikrete pavers are less common than pavers installed with a Quikrete base system. We stock common 60mm and 80mm paver thicknesses in the sizes most Los Angeles yards use, and we can match color and texture from the major manufacturers Bradford already works with, including Belgard.
Styles & brands we work with
Signs Your Quikrete Driveway & Pavers Are Failing
Most paver failures announce themselves early. Here’s what we see across Los Angeles driveways, from Sherman Oaks to South LA:
- Sunken or low pavers near the apron. The base material has settled or washed out underneath. This is almost always a substrate problem, not a paver problem, and it won’t fix itself.
- Standing water that lingers after rain. The original slope has flattened or the base has compacted unevenly. Los Angeles gets just enough rain to expose this in winter, then the sun bakes the problem in place all summer.
- Edge pavers drifting outward. The edge restraint failed or was never installed properly. Without a solid edge, the whole field starts to creep.
- Polymeric sand turning to dust between joints. PowerLoc sand breaks down over time, especially under direct Los Angeles sun. Once the joints open up, pavers start shifting.
- Cracks running across multiple pavers in a line. That’s a base failure underneath, usually from poor compaction or a tree root. Replacing individual pavers won’t fix it; the base under that line has to be rebuilt.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Quikrete-compatible paver driveway in Los Angeles, you’re looking at $8,260 to $21,240 installed. That range covers removing the old surface, excavating to the right depth, compacting the base, installing the sand setting bed, laying pavers, cutting edges, and sweeping in polymeric sand. Driveway size and access are the two biggest price drivers: a long narrow driveway in the hills costs more per square foot than a standard flat suburban pad because of hauling and grading.
For paver patios, the installed range is $4,130 to $12,980. Smaller repair jobs, like replacing a section of failed base and relaying pavers, start lower and are quoted as a written line-item price before any work begins. That’s the Garrison Standard: you get the number, the scope, and the guarantee in writing, and the number doesn’t move at the door.
| Service | Installed Price Range (Los Angeles) |
|---|---|
| Paver Driveway Installation | $8,260 – $21,240 |
| Paver Patio Installation | $4,130 – $12,980 |
| Concrete Driveway Installation | $5,310 – $14,160 |
| Driveway Replacement | $5,900 – $16,520 |
Every job we do carries the 365-Day Done Right Promise in writing. If the pavers shift, sink, or the joint sand fails within a year, we come back and correct it at no charge. No arguing about whose fault it is. Straight number, real scope, no surprises at the punch list.
DIY or Call Us?
You can check a few things yourself without risk. Look at the edge restraints: if you can see them pulling away from the pavers, that’s a problem you can identify. Check where water pools after rain. Look for pavers that rock when you step on them. None of that requires a tool.
What you shouldn’t do is start pulling pavers and digging out base material on a driveway that carries vehicle weight. Compaction matters, and Los Angeles soil shifts with the wet-dry cycle in ways that make a poorly compacted repair fail within months. Once you dig out a section, you own the re-leveling, the compaction, the edging, and the joint sand, and if any of those steps is shortchanged, you’ll be back out there in six months doing it again. We do this work with compactors, levels, and the right base depths for Los Angeles soil, and the repair is covered for a full year. If you want an exact price on your Quikrete driveway or paver repair, call (903) 568-7222.
FAQs
A properly installed paver driveway in Los Angeles lasts 25 to 30 years, with the base system being the deciding factor. Pavers themselves rarely fail; the base underneath is what gives out first, usually from poor initial compaction or water intrusion over years of wet winters and dry summers. Call (903) 568-7222 for an inspection and a written quote.
Yes, in most cases we can remove the failed section, rebuild the base underneath, and relay the same pavers. If the base failure runs deep or wide, a full replacement may cost less per square foot than patching. We’ll give you both numbers in writing before you decide.
A typical section repair takes one to two days on site, including base removal, re-compaction, re-laying pavers, and joint sand. Full driveway replacements in Los Angeles usually run three to five working days depending on access and size. We’ll give you a schedule with your written estimate.
We keep common Quikrete paver base, all-purpose sand, and PowerLoc jointing sand on hand for Los Angeles jobs, along with 60mm and 80mm pavers in standard colors. Bradford Remodeling also works with Belgard, KraftMaid, Cambria, and Silestone products, but we’re an independent contractor, not a Quikrete dealer.
Written by Curtis Lane, Owner, Bradford Remodeling at Bradford Remodeling, serving Los Angeles and nearby areas.
