Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Driveway & Pavers: The Los Angeles Owner’s Guide
We stock and install CertainTeed-compatible driveway and paver materials across Los Angeles, with typical installed paver driveway work running $8,260 – $21,240 depending on square footage, substrate condition, and paver style. Most paver repairs and replacements we schedule within a week, not a month. Homeowners usually discover the problem the same way: a paver sinks at one corner after a hard rain, a run of edge restraint lets go along the sidewalk, or the sand joints start washing out faster than they can be swept back in. That’s when the call comes to Bradford Remodeling.
What you’re seeing isn’t usually a paver failure. It’s a base failure underneath it, and that distinction determines whether you need a cosmetic fix or a real rebuild. We write that diagnosis down and put a price on it before any work starts.
Which CertainTeed Models This Applies To
CertainTeed’s paver and driveway product lines split into two categories: concrete unit pavers (sold under their Landmark and commercial lines in past years) and the newer composite and permeable paver systems carried through distributors across Los Angeles. The compatibility gotcha most homeowners hit is edge restraint. CertainTeed pavers run tighter dimensional tolerances than many generic concrete pavers, and if the original install used a cheap plastic edging instead of a rigid aluminum or concrete restraint, the perimeter fails first, long before the pavers themselves show wear.
To identify your exact paver, check the underside or the original invoice for a lot code and size stamp, typically a metric dimension like 60mm or 80mm thickness. The 60mm units are pedestrian-grade. Driveways need 80mm minimum in Los Angeles because of vehicle load, and we see 60mm pavers on driveways more often than we should. That’s a base and spec problem, not a paver problem. On the OEM versus aftermarket question: quality aftermarket pavers can match visually, but if you’re replacing a section of a CertainTeed layout, we recommend OEM or a manufacturer-matched equivalent so color lot and dimensional drift don’t leave you with a patchwork driveway. Copy brands look right for about a year. Then the fade starts.
Styles & brands we work with
Signs Your CertainTeed Driveway & Pavers Is Failing
- Sunken or rocked pavers in a low spot. The paver is fine; the base beneath it has eroded or was never compacted properly. Los Angeles clay soil expands and contracts through wet winters and dry summers, and a base that wasn’t built for that movement will settle unevenly.
- Sand joints washing out after every rain. Polymeric sand failed or was never used. Once water gets under the pavers, the base starts migrating and you get the sunken spots above.
- Edge pavers tilting outward along the driveway border. The edge restraint has failed. Pavers are locked together in the field, but the perimeter needs rigid constraint or the whole assembly spreads.
- Visible cracking through multiple pavers in a line. This usually points to a substrate crack telegraphing upward, or a heavy vehicle point load the base couldn’t carry. Tree roots from mature Los Angeles oaks and ficus do the same thing.
- Standing water or white efflorescence on the surface. Drainage was never graded right. Efflorescence itself is cosmetic, but standing water means the base is saturating, and saturated base fails in Los Angeles’s shrink-swell clay.
Replacement Cost & What’s Included
Paver driveway installation in Los Angeles runs $8,260 – $21,240 installed, with most residential two-car driveways landing in the $11,000 – $16,000 range. A paver patio runs $4,130 – $12,980. What moves the number: total square footage, whether the existing base can be salvaged or needs full excavation, access for equipment, and the paver style you select. A basic interlocking paver costs less than a permeable paver system, and a straight-lay pattern costs less than a herringbone with a contrasting border.
Our written price includes the entire scope: demolition and haul-off of failed material, base prep and compaction, paver installation, edge restraint, polymeric sand, and final grading. No numbers that move at the door. Every completed paver job carries the 365-Day Done Right Promise: if the work fails inside that year, we return and correct it at no charge, in writing, before we start.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can inspect the obvious: check whether edge restraint is intact, whether sand joints are full, and whether water pools against the foundation. You can re-sweep polymeric sand into hairline joint loss. What you should not do is pull up a section of pavers and start re-grading. Once you break the interlock and disturb the base, you’ve turned a repair into a rebuild, and a driveway that drains toward your foundation is a structural problem that affects the whole property.
Paver work is hard on the back and unforgiving on the details. A half-inch of slope error over twenty feet means water running the wrong direction. If the damage is more than a few sunken pavers, call us at (903) 568-7222 and we’ll give you a straight number, real scope, no surprises at the punch list.
FAQs
A properly installed paver driveway in Los Angeles typically lasts 25 – 30 years, though the polymeric sand joints will need re-sanding every 3 – 5 years. The pavers themselves rarely fail; it’s the base and edge restraint that determine lifespan. Call us at (903) 568-7222 if your joints are washing out and we’ll assess whether it’s a maintenance fix or a rebuild.
Yes, isolated sunken sections can often be lifted, re-based, and re-set without replacing the pavers, provided the units aren’t cracked and the base failure is contained. If the settlement runs across the entire driveway, a full re-base is usually the honest call. We’ll tell you which one you’re looking at and put the price in writing before we lift a single paver.
Most residential paver driveway replacements in Los Angeles take 3 – 5 working days, including demolition, base prep, installation, and joint sanding. Weather and access can add time. You’ll have the schedule in writing as part of your estimate, not as a verbal promise.
We maintain working relationships with Los Angeles paver distributors and can source CertainTeed product typically within days, not weeks. For repair patches, we match existing color and size as closely as the manufacturer allows. Call (903) 568-7222 and we’ll confirm availability for your specific paver before you commit to anything.
Contact Bradford Remodeling
If your CertainTeed driveway or paver hardscape is failing, don’t guess at the cause. Curtis Lane and the Bradford Remodeling crew will assess it, write the scope, and hand you a fixed price before any work starts. We also handle related exterior projects using documented brands like Belgard, Unilock, and GAF, plus interior work with KraftMaid, Cambria, and Silestone. Bradford Remodeling is an independent contractor and is not affiliated with CertainTeed. Call (903) 568-7222 to schedule your free estimate.
Written by Curtis Lane, Owner, Bradford Remodeling at Bradford Remodeling, serving Los Angeles and nearby areas.
