Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose CertainTeed Construction
Bradford Remodeling provides independent CertainTeed construction service across Los Angeles, focusing on the roof systems where the brand’s engineering actually matters: Landmark and Presidential asphalt shingles, Cedar Impressions polymer siding, and Flintlastic SA self-adhered membranes. We are not a CertainTeed-authorized installer, and we say that plainly. What we are is a Los Angeles general contractor that rebuilds CertainTeed assemblies to the manufacturer’s published accessory specs, because in this climate the accessories, not the shingles, are where roofs fail. Call (903) 568-7222 for a written estimate on any CertainTeed roof, siding, or flashing repair in the Los Angeles area.
Most Los Angeles roofs wearing CertainTeed shingles were installed piecemeal: shingles went down, but the specified starter course, ridge caps, and underlayment either got skipped or swapped for generic substitutes. That’s the single biggest reason CertainTeed systems underperform here. Curtis Lane, owner of Bradford Remodeling, grew up in the Crenshaw district watching his grandfather patch stucco and re-frame rooms that never stayed square. He trained in construction technology at Los Angeles Trade-Technical College on Washington Boulevard, and he’s spent two decades learning how materials behave under Southern California sun and Santa Ana wind. That local knowledge is what lets us diagnose a CertainTeed failure correctly the first time.
Key Takeaways:
- Independent CertainTeed service in Los Angeles, not factory-authorized, never pretending to be
- We rebuild to CertainTeed’s published accessory specs, not just the shingle field
- OEM starter, ridge caps, and Flintlastic membranes on every repair
- Written price before work starts, backed by the 365-Day Done Right Promise
- Live person answers the phone 24/7 at (903) 568-7222
Why Trust Bradford Remodeling for Your CertainTeed Construction?
CertainTeed engineering assumes a system, not a stack of shingles. Landmark and Landmark Pro architectural shingles are spec’d to work with CertainTeed’s own underlayment, starter course, and ridge caps. When a Los Angeles roofer installs the shingles over generic felt with no starter course, the assembly loses its wind-uplift rating along the ridge and rake edges. We see the result after every Santa Ana event: lifted shingles, torn edges, and homeowners holding a warranty that was voided at installation without them knowing it.
Curtis Lane’s crews inspect the whole system, not just the visible failure. They can tell on sight whether a leak is a fastener, a flashing, or a product defect because they’ve handled Landmark, Presidential, and Cedar Impressions assemblies daily for years. Bradford Remodeling operates as an independent business under the Garrison Partners family, established 2004, and every job is held to The Garrison Standard: a written price before any work starts, uniformed background-checked technicians, and the 365-Day Done Right Promise. If the work fails inside the guarantee window, we come back and correct it at no charge. Straight number, real scope, no surprises at the punch list.
We’re a general contractor first, not a brand rep. That means when we recommend a CertainTeed repair, it’s because the material warrants it, not because someone hands us a spiff. And when a different material makes more sense, we’ll say so.
Styles & brands we work with
Common CertainTeed Construction Problems We Fix in Los Angeles
- Wind uplift on Landmark shingles along ridge and rake edges. The shingles themselves are fine. The problem is almost always missing or substituted starter course and underlayment. CertainTeed’s Landmark line is tested as a system. Install the top layer over generic felt without the specified starter, and the first strong Santa Ana blows the edge course loose. We rebuild the edge details to CertainTeed’s published accessory specs.
- Premature granule loss on south-facing Landmark Pro slopes. Los Angeles gets year-round UV but very little rain. South-facing slopes bake, and granules start shedding earlier than the warranty math would suggest. Some granule loss is normal aging; a pile of granules in the gutter every week is not. We check surface integrity across the slope before recommending repair or replacement.
- Cracked Cedar Impressions siding panels at nail slots. CertainTeed’s polymer siding expands and contracts with temperature. After years of dry heat cycling, panels that were nailed too tight crack at the fastener slots. The panel didn’t fail; the installation did. We replace affected panels and re-fasten the neighboring courses with the proper clearance.
- Failed pipe boots, valley flashing, and step flashing against stucco. This is the most common leak source on CertainTeed roofs in Los Angeles, and it has nothing to do with the shingles. Pipe boots dry out and split. Valley flashing loses its seal at the membrane transition. Step flashing against stucco walls gets pulled loose by differential movement. We fix the flashings and boots, not the shingle field, when that’s where the water is actually entering.
- Flintlastic SA transition failures. CertainTeed’s self-adhered modified bitumen membrane works exceptionally well when primed correctly. Skip the primer or rush the lap, and water tracks sideways under the course. It looks like a shingle leak; it’s a membrane installation error. We pull the valley, rebuild the transition to CertainTeed’s published detail, and the leak stops without touching the rest of the roof.
A 1960s ranch house in the Valley had a persistent ceiling stain the previous roofer blamed on the Landmark field shingles. We pulled the valley and found the shingles were fine. The Flintlastic membrane had not been primed correctly at the transition, so water tracked sideways under the course. Our crew rebuilt the valley to CertainTeed’s published detail, replaced three cracked pipe boots, and the stain stopped without touching the rest of the roof. That’s the difference between diagnosing the system and guessing at the symptom.
CertainTeed Parts & Our Repair-vs-Replace Approach
We use CertainTeed OEM accessories on every repair: starter course, ridge caps, and Flintlastic membranes. These are the pieces that carry the system rating, and generic substitutes void the logic that keeps the warranty intact. For fasteners and pipe boots, we use high-grade aftermarket products where the spec is equivalent, because CertainTeed doesn’t manufacture fasteners and the aftermarket options are often better for Los Angeles conditions.
The repair-vs-replace decision is honest. If a slope has failed only at flashings and boots, we repair those. If granule loss or shingle embrittlement is widespread across the field, patching is money thrown away, and we recommend full replacement with a written line-item quote. We stock common CertainTeed accessory materials locally for CertainTeed repair in Long Beach and throughout Los Angeles for fast turnaround, and we can source specific colors and profiles when needed. Call (903) 568-7222 for a written estimate on your CertainTeed repair or replacement.
Our CertainTeed Service Process – Step by Step
- 1
Diagnosis. We inspect the entire CertainTeed assembly: shingle field, starter course, underlayment, ridge caps, valleys, flashings, and boots. We trace the water path, not just the visible damage.
- 2
Repair or install. For repairs, we remove only the affected courses, rebuild the flashing or membrane detail to CertainTeed’s spec, and re-install with OEM accessories. For replacements, we strip to the deck, inspect the substrate, and build the full system: underlayment, starter, shingles, ridge caps, and ventilation.
- 3
Test. We water-test repaired valleys and flashings where feasible, and we check the assembly for proper fastening patterns and lap alignment before we call the job done.
- 4
Warranty. Every completed project gets a written guarantee under the 365-Day Done Right Promise. If the work fails inside that window, Bradford Remodeling returns and corrects it at no charge. The written guarantee is in your hand before we leave the site.
See the difference
Before
After
Before
After
Before
AfterCertainTeed Products We Service & Install in Los Angeles
Our crews work with the full range of CertainTeed roof and siding products common in CertainTeed in Anaheim and Los Angeles. We service and install Landmark and Landmark Pro architectural asphalt shingles, Presidential Shake and Presidential TL luxury asphalt, Cedar Impressions polymer siding, and Flintlastic SA self-adhered modified bitumen membranes for low-slope and valley applications. We stock OEM starter course, ridge caps, and Flintlastic rolls locally. For color-matched shingle replacement, we source from Los Angeles-area distributors within a few days, so you’re not stuck with a patch that doesn’t match the existing roof.
We Also Service These Brands
Bradford Remodeling is a full-service Los Angeles general contractor, not a single-brand shop. Alongside CertainTeed, we install and service KraftMaid cabinetry, Cambria and Silestone surfaces, Kohler fixtures, GAF and Owens Corning roofing, James Hardie siding, and Therma-Tru doors. That matters when a remodel spans multiple systems and you need one crew that speaks every trade.
FAQs – CertainTeed Construction Service in Los Angeles
No, the CertainTeed shingle warranty is tied to the product, not the installer. However, the warranty assumes the system was installed to CertainTeed’s published specs: the correct underlayment, starter course, ridge caps, and flashing details. Many Los Angeles roofs were installed without those accessories, which means the warranty was compromised at installation regardless of who does the repair. We rebuild to the published specs, which protects what remains of your warranty coverage. Call (903) 568-7222 for a system inspection and written estimate.
Some granule loss is normal aging, especially on south-facing Los Angeles slopes that see intense year-round UV and little rain. A steady stream of granules in the gutter every week is not. That pattern suggests accelerated surface wear, often from a slope that runs hot, poor attic ventilation, or installation damage. We inspect the shingle surface across the full slope before recommending whether repair or replacement makes financial sense.
For the assembly to perform as CertainTeed engineered it, you need the specified underlayment. CertainTeed’s Landmark and Presidential systems are tested as a unit: underlayment, starter course, shingles, and ridge caps. Swap in a generic felt and you lose the tested wind-uplift and water-shedding performance. We use CertainTeed OEM underlayment and Flintlastic membranes on every repair and replacement, no exceptions.
Yes. CertainTeed colors are matched by series and region, not just the shingle name. We source through Los Angeles-area distributors, and most Landmark and Presidential colors are available within a few days. If your specific color has been discontinued, we’ll show you the closest current match and discuss whether a larger replacement area looks better than a small mismatched patch. Written line-item pricing before we start, always.
Asphalt shingles age faster in Los Angeles because UV degrades the asphalt and granules, even with little rain. That’s true of every asphalt brand, including Landmark and Presidential. Tile roofs, by contrast, handle UV well but crack under foot traffic and fail at the underlayment underneath. We service both. For asphalt, we watch for premature granule loss and embrittlement. For tile, we check the underlayment and flashing details. Call (903) 568-7222 for an exact quote on either system.
CertainTeed repair in Glendale and throughout Los Angeles typically runs $470 – $2,125 depending on scope: a single pipe boot replacement is at the low end, while a valley membrane rebuild runs higher. Full CertainTeed roof replacement runs $9,440 – $23,600, metal roof installation $17,700 – $47,200, and tile roof repair $710 – $2,950. These are the written ranges we quote from; the exact number depends on your roof’s size, pitch, and condition. Call (903) 568-7222 for a free written estimate with line-item pricing.
| CertainTeed Service | Los Angeles Price Range |
|---|---|
| Roof Repair | $470 – $2,125 |
| Roof Replacement & Installation | $9,440 – $23,600 |
| Metal Roof Installation | $17,700 – $47,200 |
| Tile Roof Repair | $710 – $2,950 |
Book Your CertainTeed Service in Los Angeles, CA
If your CertainTeed roof or siding is showing wear, leaking, or just not performing the way it should in this LA climate, we’ll inspect it and give you a written price before any work starts. Call (903) 568-7222 to schedule your free estimate. A live person answers, day or night.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Los Angeles since 2004.
