Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Fresno, CA | Bradford Remodeling
We provide independent KraftMaid cabinet installation, refacing, and Fresno Kitchen Remodeling across the area, and the one thing that sets our work apart here is straight talk about what this valley’s heat and dust actually do to cabinet boxes, hinges, and finishes. KraftMaid is the brand our crew has installed and repaired most in Fresno for over a decade. We know its door styles, box construction, and the specific ways it fails in this climate. Call (903) 568-7222 for a written estimate before any work starts.
Why Fresno Residents Choose Us for KraftMaid Service
Most Fresno homeowners who call us have already been through the wringer with someone who promised a kitchen and delivered a headache. We run this operation the way Curtis Lane built it: straight number, real scope, no surprises at the punch list. Curtis trained in construction technology at Los Angeles Trade-Technical College and spent two decades doing everything from foundation work to finish carpentry before launching Bradford Remodeling. That background means we understand how a KraftMaid cabinet box interacts with a Fresno wall that may or may not have studs where you expect them. We’re also part of the Garrison Partners family, held to The Garrison Standard since 2004, which means every price and every guarantee goes in writing before a single tool comes out. Our KraftMaid sales & service work covers the full brand lineup, and we’re the crew homeowners call when they want the job documented, not improvised.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Fresno
- Sink-base boxes swelling and crumbling. Fresno’s hard water and seasonal condensation show up first at the sink base. KraftMaid Vantage and Serenade lines built with particleboard boxes absorb that moisture over time and the bottom panel turns to mush. We cut out the failed box, check the supply lines, and rebuild with plywood where the original spec failed. If you’re doing a full kitchen, we can order Vantage with plywood construction from the start.
- Door hinge screws pulling out of MDF stiles. After years of 100°F summer cycles followed by dry winter air, the screw holes in KraftMaid Aspen and Prelude door stiles wallow out until the door droops. We repair with hardwood dowels and re-bore, or swap in new stiles if the door has more life left. This is the most common repair call we get from July through September in Fresno.
- Thermofoil peeling on south- and west-facing cabinet runs. Fresno sun through a kitchen window will delaminate a KraftMaid thermofoil door in a few years, starting at the top and bottom edges. We see it constantly on runs that face the afternoon sun. We can order genuine replacement doors for current KraftMaid lines or reface the whole run if the peeling has spread.
- Drawer glides clogged with Central Valley dust. Lower cabinets near back doors collect dust that works into the roller tracks until the drawer sticks or skips. We replace glides with full-extension soft-close hardware that holds up better to the dust load. It’s a small fix that changes how the whole kitchen feels.
- Missing studs behind the original cabinet run. This is the Fresno-specific problem that surprises people. Many older homes in this city have no studs where the original cabinets hang, which means new KraftMaid boxes cannot go up without adding blocking first. We handle that as part of the installation scope, in writing, before the job starts.
KraftMaid Service in Fresno: What Local Conditions Mean for Your Equipment
Here’s what nobody tells you when you buy cabinets in Fresno: the building department requires a permit for kitchen cabinet replacement when electrical or plumbing moves, and many older homes here have no studs behind the original cabinet run. That second part matters more than the first. We have opened walls in Fig Garden, the Tower District, and along Van Ness Boulevard and found empty air where a mounting rail should anchor. So before we hang a single KraftMaid box, we add blocking, tie it into the framing, and document the work. This is not a requirement in neighboring Clovis for like-for-like swaps, which is the kind of building-department difference that catches people off guard. In Fig Garden, our crew pulled a 1990s KraftMaid Prelude kitchen where the sink-base particleboard had swollen into mush from a slow supply-line leak. We replaced the base boxes with KraftMaid Vantage plywood construction, added new blocking to the wall, and installed a quartz countertop. The homeowner kept the original upper doors after we refaced them and swapped in soft-close hinges. That is the Bradford approach: keep what is sound, replace what failed, and put the plan in writing before we start.
KraftMaid Models & Products We Service in Fresno
We work on KraftMaid Vantage, Serenade, Prelude, and Aspen lines, plus a range of discontinued door styles from the 1990s and 2000s that still show up in Fresno tract homes. Vantage is the semi-custom line with particleboard boxes and optional plywood door construction. Serenade is the full-overlay line found in many newer Fresno builds. Prelude is the framed, partial-overlay line common in older remodels. Aspen is the raised-panel line with MDF doors. We use genuine KraftMaid replacement doors, hinges, and glides when available for current lines, and high-quality aftermarket soft-close hinges and full-extension glides for older or discontinued models. We will always show you whether a cabinet can be rehinged or needs a new box, and we lean toward repair when the box is sound.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Fresno
Here are the price ranges we give on KraftMaid work in Fresno, in writing, before anything starts:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Countertop Installation | $2,000 – $6,500 |
What drives the cost is box construction, the condition of the wall behind the cabinets, and whether you are moving plumbing or electrical. A straight cabinet swap on a wall that already has blocking costs less than a full remodel that requires permit work and new supply lines. Every estimate includes a written line-item price and a full-year guarantee under the 365-Day Done Right Promise. Call (903) 568-7222 for a free estimate, and we will walk your kitchen and give you the real number.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Fresno
You need a permit in Fresno when the cabinet replacement involves moving electrical or plumbing. A like-for-like cabinet swap in the same footprint typically does not require one. We pull permits and handle the inspections on any job where the scope triggers the requirement, and we list permit costs in your written estimate. Call (903) 568-7222 and we will tell you exactly what applies to your kitchen.
Yes, for current KraftMaid lines we order genuine replacement doors in the same style and finish. For discontinued lines, we match as closely as the current catalog allows and show you samples before ordering. If the rest of the kitchen is fine and you are only replacing the sink base, we can usually keep the upper doors and reface them to match new lowers.
That peeling is thermofoil delamination, and in Fresno it is almost always UV exposure and heat cycling on south- or west-facing cabinet runs. The laminate loses its bond at the edges first, then peels back. We replace the affected doors with genuine KraftMaid product or reface the run if the damage has spread across multiple doors.
A typical cabinet installation runs three to five working days once the boxes are on site. If we need to add wall blocking or move plumbing, add a day or two and factor in the permit inspection. We give you a written schedule with the estimate and stick to it.
Yes, and this is where the blocking work matters. Old plaster walls in Fresno often have irregular stud spacing or no studs where the cabinet run needs to hang. We frame in blocking before hanging the boxes, which keeps the cabinets level and prevents the mounting rails from sagging over time. Call (903) 568-7222 for an exact quote, we will look at your walls before you commit to anything.
Service Areas Near Fresno
We serve the Fresno service area including Fig Garden, the Tower District, and neighborhoods throughout the city. For work in other California markets, see our KraftMaid service in Sacramento page or our KraftMaid service in Miami page for coverage outside the Central Valley.
Book Your KraftMaid Service in Fresno Today
Call (903) 568-7222 to schedule a free estimate with a General Contractor in Fresno for KraftMaid cabinet work, refacing, or a full kitchen remodel. We will give you a written price, a written scope, and a written guarantee before the first tool leaves the truck.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Fresno since 2004.
