Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Los Angeles Owner’s Guide
PGT kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 installed, and the final number depends on cabinet grade, countertop material, and how much structural work your existing layout needs. We stock PGT-compatible materials alongside our documented brand roster and can usually start your project within two to three weeks of the signed scope. Most Los Angeles homeowners don’t discover a PGT problem until a hinge binds, a drawer face delaminates from moisture, or a cabinet box starts pulling away from the wall because the original installation cut corners on substrate blocking.
Which PGT Models This Applies To
PGT manufactures a range of kitchen cabinet lines, and compatibility starts with the cabinet box construction, not the door style. You’ll find a manufacturer label on the inside of a drawer box or on the back of a sink base cabinet, usually printed with the series name and a production date code. The two most common series we see across Los Angeles kitchens are the PGT Estate line and the PGT Craftsman line, and the difference matters: Estate uses ¾-inch plywood boxes with dovetailed drawers, while Craftsman uses ½-inch furniture board with stapled drawer fronts. If you’re replacing doors or drawer fronts, the hinge bore pattern matters more than the series name. PGT uses a 35mm cup hinge on most post-2010 cabinets, but some earlier runs use a 32mm bore. Measure the cup diameter before you order anything. As for OEM versus aftermarket, PGT doors and drawer fronts are best sourced through a PGT-authorized dealer because the finish codes are proprietary. Aftermarket hinges and glides from Blum or Salice work fine and actually outlast the originals in our experience here where kitchen heat and coastal humidity cycle hard. Bradford Remodeling is an independent contractor and not affiliated with PGT, but we work with PGT components daily.
Styles & brands we work with
Signs Your PGT Kitchen Remodeling Is Failing
- Drawer boxes sag or bind when you open them. The undermount glides PGT used on some series were rated for 75 pounds, and once a utensil drawer exceeds that, the nylon rollers wear flat. You feel a catch halfway out, then a hard stop.
- Door fronts show hairline cracks running from the hinge cup. This is fatigue in the MDF core, and it’s almost always a humidity issue. Los Angeles kitchens without adequate range-hood ventilation push moisture into the cabinet faces every time you boil pasta.
- A corner cabinet pulls away from the wall. The original installer likely skipped blocking in the stud bays. The cabinet looks fine until you put a stand mixer in it, and then the gap at the crown molding opens up.
- Laminate or thermofoil edges lift and peel. PGT thermofoil doors delaminate when dishwasher steam vents directly at a cabinet face. Once the edge lifts, the MDF core soaks moisture and swells, and the door is done.
- Soft-close dampers stop catching. The damper cylinder inside the hinge arm loses hydraulic pressure after about 8,000 cycles. That is roughly seven years of average daily use in a Los Angeles household.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Los Angeles, you should expect a full PGT kitchen remodel to land between $16,520 and $53,100. Smaller footprint remodels with stock cabinets and laminate counters run $10,620 to $23,600. Cabinet installation alone sits at $4,720 to $15,340, countertops at $2,360 to $7,670, and a kitchen island at $3,540 to $11,800 when it requires moving plumbing or electrical. What moves a PGT remodel up the range is the structural remediation: shimming out uneven walls, adding blocking for cabinet mounting, relocating rough-in supply lines, and leveling a subfloor that has settled. Every Bradford Remodeling quote is a written price before any work starts, and the price does not move at the door. That written quote includes material line items, demolition and disposal, all substrate prep, installation labor, and a final walkthrough where you get the signed 365-Day Done Right Promise in hand. If anything fails inside that first year, we return and correct it at no charge.
DIY or Call Us?
There are safe things to check yourself. Confirm the label inside the drawer box to identify the PGT series. Check hinge cup bore sizes with a tape measure. Look underneath for whether the cabinet is face-framed or frameless. What you should not do is attempt to replace a cabinet box, rehang a wall cabinet that has pulled away, or re-laminate a countertop. A wall cabinet that drops while loaded with dishes causes serious injury, and the tear-out required to retire a failed cabinet box is not a weekend project. Curtis Lane has seen too many Los Angeles kitchens where a homeowner’s patch job created a bigger repair bill than the original problem would have cost. If the cabinet structure is sound and you are only swapping door fronts, that is manageable. If the box is compromised, call us at (903) 568-7222 before you touch another screw.
FAQs
PGT cabinet boxes, when properly installed on blocking and kept dry, last 20 to 30 years in a Los Angeles kitchen. Doors and drawer fronts typically need replacement at the 12 to 15 year mark due to finish wear, hinge fatigue, and moisture damage. Coastal areas like Playa del Rey and San Pedro see shorter door lifespans because salt air accelerates hinge corrosion. Call (903) 568-7222 if you want an honest assessment of whether your PGT cabinets still have service life left.
Yes, if the cabinet box is still square and the failure is limited to hinges, glides, drawer fronts, or door faces. We repair and rehang PGT boxes regularly. If the box itself has delaminated or pulled loose from the wall, replacement is the cheaper long-term fix. Our written estimate will tell you which route we recommend and why, with the cost of each option laid out side by side.
A full PGT kitchen remodel takes two to six weeks depending on cabinet lead time and the extent of plumbing and electrical rough-in. Cabinet-only installs are typically three to five days. We sequence demoliton, rough-in, and drywall before cabinets ever arrive, so we are never waiting on materials with your kitchen torn apart. The schedule is in the written scope before any work starts.
Our crews carry common PGT-compatible hinges, glide kits, damper cylinders, and mounting hardware on every truck, which covers most door and drawer repairs in a single visit. PGT-specific doors and drawer fronts are ordered to spec from the distributor, which typically takes seven to ten business days in Los Angeles. We also work with KraftMaid, Cambria, and Silestone components for kitchens that mix brands. Call (903) 568-7222 to confirm what we can bring to your first appointment.
Straight number, real scope, no surprises at the punch list. If you have a PGT kitchen that is failing or just tired, call (903) 568-7222 for a free estimate. Curtis Lane and the Bradford Remodeling crew will walk the job with you, write the price, and stand behind the work for a full year.
Written by Curtis Lane, Owner, Bradford Remodeling at Bradford Remodeling, serving Los Angeles and nearby areas.
