Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Unilock Construction
We’re an independent Unilock paving crew offering Unilock repair in Los Angeles, and we install and repair Unilock paver driveways, patios, and walkways throughout the Basin. Our Unilock work is different because we build for Los Angeles soil movement and drainage first, then we make the finished field look exactly the way the product line intended. We’re not a Unilock-authorized contractor, and we’ll tell you that straight up. What we are is a crew that has placed thousands of square feet of Unilock concrete pavers in this city, and we know how Brussels Block behaves in Los Angeles sun and how Euclid handles vehicle loads on a driveway that sees real traffic. If your Unilock project needs diagnosis or repair, call (903) 568-7222 to get Curtis Lane’s read on it.
Why Trust Bradford Remodeling for Your Unilock Construction?
Our credibility with Unilock products comes from working with the same regional distribution channels and spec details that Unilock-trained contractors use, not from a manufacturer authorization. We buy Unilock-manufactured pavers direct from the same southern California distributors every other reputable hardscape contractor uses, which means we have access to the full Unilock line and current lot-matching on Brussels Block, Beacon Hill, Euclid, and Umbriano, and we provide Unilock service in Glendale and surrounding areas. We also know what happens when an installation goes wrong, because we get called to fix it. Curtis Lane, our owner, trained in construction technology at Los Angeles Trade-Technical College on Washington Boulevard, and he spent the better part of two decades doing foundation work before focusing on hardscape and remodeling. That’s why we’re obsessive about what’s under the paver: the compacted aggregate base, the pitch, the edge restraint. When we rebuild a Unilock driveway in Los Angeles, we build it so it drains, holds its joint, and won’t rut in the first place. Every Unilock project we complete is covered by our 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. Written guarantee in your hand before we leave the site.
Styles & brands we work with
Common Unilock Construction Problems We Fix in Los Angeles
Below are the failures we see most often on Unilock installations in Los Angeles. Not every one of these requires a full teardown, and we’ll tell you when it doesn’t.
- Efflorescence bloom on Brussels Block and Beacon Hill: White, chalky salt deposits that wick through the paver face after rainy seasons or irrigation overspray. Los Angeles irrigation systems frequently hit pavers at corners and along planting beds, and that repeated wetting-drying cycle draws salts to the surface. It’s usually cosmetic, but if it keeps coming back, the real issue is drainage or recurring moisture from a broken sprinkler head. We diagnose the source before we clean or seal.
- Polymeric sand failure on Umbriano and Euclid installations: Joint sand washes out or cracks when the base wasn’t compacted in lifts to spec, or when someone used cheap, non-polymeric sand from the start. Umbriano’s random-pattern look depends on tight joints; once the sand goes, the units shift and the pattern starts to wander. We strip out the failed sand, reset shifted units, and re-sand with a quality polymeric product that firms up and holds.
- Edge restraint separation on driveways and patios: Paver edges start spreading outward because the plastic edge restraint wasn’t spiked into stable base material, or wasn’t spiked at all. This is one of the most common shortcuts we see in Los Angeles. Once the edge lets go, you’ll see gaps opening along the border and the first signs of a creeping pattern. We pull the edge, re-set the perimeter units, and re-spike the restraint into compacted material, not loose fill.
- Base settlement and rutting on Euclid and Brussels Block driveways: Low spots, sunken wheel paths, and uneven surfaces where the aggregate base wasn’t deep enough for the load or the Los Angeles soil below shifted. Los Angeles has a mix of expansive and sandy soils, and driveways take vehicle weight every day. If the base fails, the pavers fail. We re-compact in lifts and reset the field to the correct slope. If the original base is too thin entirely, we’ll tell you that honestly and rebuild it properly.
- Spalling and chipped paver faces on older Unilock units: Freeze-thaw isn’t the issue in Los Angeles, but years of sun and irrigation water can degrade the surface of older Unilock pavers, especially if they were sealed with a film-forming sealer that trapped moisture. Spalled pavers can often be spot-replaced if we can match the current lot. When the face is shattered across a large percentage of the field, replacement is the honest call.
Unilock Parts & Our Repair-vs-Replace Approach
When we repair Unilock work, we use Unilock-manufactured pavers and matching accessories whenever they’re available, because the color and texture have to blend. Brussels Block, Beacon Hill, Euclid, and Umbriano all have specific lot variations, and a knock-off paver from a different plant will never match. For polymeric sand and edge restraints, we source quality aftermarket products from established hardscape suppliers, because Unilock doesn’t manufacture those, and the aftermarket options are proven. The real decision is repair versus replace. If the existing Unilock pavers are structurally sound, we repair and re-level rather than tear out the whole field. If the base has settled past saving or the pavers are spalling across a wide area, we’ll tell you replacement is the right move, and we’ll explain exactly why. You’ll get a written price either way before we start. Call (903) 568-7222 if you want Curtis Lane to walk your Unilock surface and give you the straight read.
Our Unilock Service Process – Step by Step
- 1
Diagnosis and base assessment: We identify what’s actually failing: the paver face, the joint sand, the edge, or the compacted base underneath. On Los Angeles driveways, we pay particular attention to wheel-path settlement and drainage pitch, because those are the first things to go when the base was built wrong.
- 2
Repair or reinstallation: If we’re saving the field, we pull the affected Unilock units, re-compact the base in lifts, reset the pavers to correct slope, and re-spike the edge restraint. If we’re replacing, we remove the old field, rebuild the base to spec for the load and the soil, and lay the new Unilock product with proper joint spacing.
- 3
Joint sanding and compaction: We sweep in polymeric sand, vibrate it down into the joints, and top it off. This is the step that determines whether the joints hold or wash out in the first Los Angeles rain.
- 4
Testing and drainage check: We run water across the finished surface to confirm pitch and drainage direction, especially toward the street or the correct catch basin. A paver field that doesn’t drain is a warranty claim waiting to happen.
- 5
Written guarantee and close-out: You get a clean site, the scope of work in writing, and the signed 365-Day Done Right Promise. If anything fails inside that year, we return at no charge. That’s The Garrison Standard, and it’s how we close every job.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Los Angeles
We work with the full range of Unilock concrete paver and retaining wall products sold through our southern California distributors. That includes Brussels Block, the tumbled dimensional paver you see on older Los Angeles driveways and patios; Beacon Hill, the traditional flagstone-look paver; Euclid, the oversized slab-style unit for modern driveways and large patios; and Umbriano, the textured random-pattern paver that’s become a staple for upgraded Los Angeles homes. We keep common accessory stock locally available through our suppliers for faster turnaround on repairs, and we can order any Unilock product that’s currently in production. If you’re planning a new paver driveway, patio, or walkway in Los Angeles, we’ll spec the right Unilock line for your soil, load, and drainage conditions, not just whatever’s on sale, and we also offer Unilock service in Long Beach.
We Also Service These Brands
Our hardscape work isn’t limited to Unilock. Bradford Remodeling also services and installs KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, among others. For Los Angeles homeowners, that means one crew, one phone number, and a single written guarantee across a whole remodel, not three different contractors pointing fingers at each other. Call (903) 568-7222 and ask for Curtis Lane.
FAQs – Unilock Construction Service in Los Angeles
No. We are an independent Unilock service provider, not a Unilock-authorized contractor, and we’ll tell you that before you ever sign anything. What we bring to Unilock work is years of installation and repair experience with Unilock concrete pavers and retaining walls across Los Angeles, using the same distribution channels and spec details the authorized contractors use. We’ll also write our price down before we start and back the finished work with our own 365-Day Done Right Promise. Call (903) 568-7222 and we’ll walk you through the difference honestly.
In most cases, yes. Brussels Block has been in production long enough that we can usually source the current lot from our Los Angeles distributors, and with a field-set paver like Brussels Block, the color variation is forgiving. We pull the settled or cracked units, re-compact the base, reset the pavers, and re-sand the joints. The patch won’t be invisible on a 20-year-old driveway, but when we’re done the pattern should read as a continuous field again. When the lot mismatch would be too severe, we’ll tell you before we order a single paver. Call (903) 568-7222 for a straight answer on your driveway.
That white powder is efflorescence, and the answer on whether it comes back depends on the water source. Umbriano is a dense, textured paver, and when irrigation overspray or poor drainage keeps moisture cycling through the unit, salts migrate to the face and bloom. If we clean it and the moisture source is still there, it will come back. That’s why we find the water problem first: a broken sprinkler head near the patio, a downspout dumping runoff, or a pitch issue. Then we clean the surface and advise you on whether sealing makes sense for your situation. Call (903) 568-7222 and we’ll take a look before you spend money on a cleaner that won’t solve the root cause.
For a Unilock Euclid driveway in Los Angeles that carries daily vehicle loads, we build the base at least 8 – 12 inches of compacted aggregate, depending on the soil underneath and the pitch of the site. Euclid is an oversized slab unit, which means it’s heavier and less forgiving than smaller pavers; a thin base under Euclid fails fast under traffic. This is the exact failure we’ve seen on Los Angeles driveways where someone bid the job cheap and skimped on excavation. Call (903) 568-7222 if you want us to spec your site properly.
You can absolutely lift and reset individual Unilock pavers that have sunk, and we do it all the time across Los Angeles and Anaheim Unilock service areas. If the settling is localized, say a corner of the patio has dipped because a downspout undercut the base, we pull the affected units, re-compact the base in that area, reset the pavers to grade, and re-sand. The whole patio only comes out when the base failure is widespread or the pavers themselves are degrading. A good diagnosis tells you which one you’re dealing with. Call (903) 568-7222 and we’ll give you that diagnosis in writing.
We do seal Unilock pavers when sealing makes sense for the surface and the site, and we’ll tell you when it doesn’t. Sealing by itself does not stop polymeric sand from washing out. The sand washes out because the base wasn’t compacted properly, the wrong sand was used, or water is moving through the joints under pressure. Sealing over failed joints just locks in the problem. The right sequence is: repair the base, re-sand with quality polymeric sand, and then decide if a sealer fits your maintenance goals. Call (903) 568-7222 for a quote on any Unilock paver repair in Los Angeles.
Book Your Unilock Service in Los Angeles, CA
If your Unilock driveway, patio, or walkway is failing or if you’re planning a new installation, call (903) 568-7222. You’ll get a real person on the phone, a straight diagnosis, and a written price before any work starts. Straight number, real scope, no surprises at the punch list. Ask for Curtis Lane.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Los Angeles since 2004.
