Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Los Angeles Owner’s Guide
We stock and install Wellborn-compatible driveway and paver components across Los Angeles, with most replacements running $295 to $21,240 depending on whether you’re sealing, repairing, or doing a full tear-out and reinstall. The most common call we get starts the same way: a homeowner walks out to find a sunken paver, a crumbling edge, or standing water that wasn’t there last winter. Bradford Remodeling is an independent contractor, not affiliated with Wellborn, but we work with their material specifications daily and know exactly what a Wellborn paver layout needs to stay square through Los Angeles heat, rain, and the occasional trembler.
Here’s the straight answer: if your Wellborn pavers are shifting, cracking, or separating, the failure is almost always in the substrate or the edge restraint, not the pavers themselves. That’s the first thing we check.
Key Takeaways
- Installed pricing for Wellborn driveway and paver work in Los Angeles runs $295 – $21,240 depending on scope
- Most failures trace back to substrate settlement or failed edge restraint, not the paver itself
- We put a written price in your hand before any work starts, and every job carries the 365-Day Done Right Promise
- Call (903) 568-7222 for a free estimate on Wellborn paver repair or full replacement
Which Wellborn Models This Applies To
Wellborn doesn’t brand their pavers the way they brand cabinetry, so the “model” question is really about the paver line, the joint width, and the base profile. What we commonly see in Los Angeles driveways and patios are Wellborn-spec concrete pavers in 60mm and 80mm thicknesses for vehicular traffic, with 50mm pavers reserved for foot traffic only. If your driveway has 50mm pavers on it, that’s the first problem, and it’s a common one when a previous contractor cut a corner on material cost.
To identify what you have, flip a loose paver and look for the manufacturer’s stamp on the underside. Measure the thickness in millimeters. Then check the joint width: Wellborn driveway systems are typically laid with 1/8-inch to 3/16-inch joints using polymeric sand. If your joints are wider than a quarter-inch or filled with plain mason sand, the system wasn’t installed to spec. For replacements, OEM Wellborn pavers give you an exact color and finish match. Quality aftermarket equivalents from Belgard or Unilock can work, but the color batch won’t be identical, which matters if you’re patching a section rather than replacing the whole run. We stock both on the truck in Los Angeles and will tell you plainly which one makes sense for your job.
Styles & brands we work with
Signs Your Wellborn Driveway & Pavers Is Failing
- Sunken or dipped sections. This is almost always base failure. Los Angeles clay soil expands and contracts with moisture, and if the base wasn’t compacted in lifts, the pavers follow the soil down. You’ll see a shallow bowl form, usually after the first heavy rain season.
- Pavers rocking or shifting underfoot. Loose bedding sand means the pavers lost their lock. The cause is usually an edge restraint that failed, letting the whole field drift outward a fraction at a time until nothing holds tight.
- Weeds pushing through joints. Plain sand joints feed weeds. Polymeric sand, installed correctly, hardens and blocks them. If you’re pulling weeds every month, the joint compound failed or was never there.
- Crumbling edges at the driveway apron or perimeter. Los Angeles traffic loads stress the transition where concrete meets pavers. Without a proper concrete edge restraint or soldier course, the pavers at the boundary crack under vehicle weight.
- Standing water or a white haze on the surface. Poor pitch or a clogged drain leads to ponding, which in turn causes efflorescence, that chalky white film. Both point to slope and drainage problems, not just surface stains.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Los Angeles, driveway sealing runs $295 – $825, paver patio installation runs $4,130 – $12,980, and a full paver driveway installation runs $8,260 – $21,240. Concrete driveway replacement falls in the $5,310 – $14,160 range, and a full tear-out with new asphalt runs $4,130 – $10,620. Most Wellborn repairs fall somewhere between a simple re-sand at the low end and a full reinstall at the high end.
What drives the number: total square footage, whether the existing base is salvageable or needs full excavation, access for equipment, and the paver thickness required. If you have 50mm pavers on a driveway, the honest fix is replacement with 60mm or 80mm, and that’s the bulk of the cost. Every quote includes parts, labor, base work, edge restraint, polymeric sand, haul-away, and site cleanup. You get a written line-item price before we start, and if anything fails within one year, the 365-Day Done Right Promise means we come back and fix it at no charge. That part’s in writing, not a handshake.
DIY or Call Us?
Your call, here’s the honest split. What an owner can safely do: pull weeds, sweep the surface, check for loose or rocking pavers by walking the field, and inspect the edge restraint for cracks or separation. That’s a fifteen-minute inspection and it’s genuinely useful.
What goes wrong with DIY: you pull up a few pavers, find a soft base, add some sand, set the pavers back, and six months later the same dip is back because the base was never compacted. Patching without fixing the substrate is wasted labor. Replacing a paver field also means cutting edge pavers, grading for drainage, and compacting in lifts with a plate compactor. Get the pitch wrong and water runs toward the foundation instead of away from it. If you’re dealing with a sunken section, a cracked edge, or drainage, call (903) 568-7222 and we’ll give you a written number before any work starts.
FAQs
Wellborn concrete pavers installed on a properly compacted base with solid edge restraint typically last 25 to 40 years in Los Angeles, though the surface may show wear and fading after 15 to 20 years. The pavers themselves rarely fail; the base and edge restraint are what determine lifespan. Call (903) 568-7222 if you want us to inspect your base and tell you honestly how many years are left in the system.
Yes, if the base underneath is still sound. We lift the affected pavers, add and re-compact bedding material, reset the pavers, and re-apply polymeric sand. If the base under the sunken area has eroded or washed out, a proper fix means excavating that section and rebuilding the base. We’ll tell you which one applies after we open it up, and the written quote covers both scenarios before we start.
A standard residential paver driveway replacement in Los Angeles runs three to five working days, including demolition, base compaction, paver installation, edge restraint, and joint sand. Smaller repairs like re-sanding or spot leveling are typically one day. You’ll get a start date and a completion window in the written scope before we begin.
We keep common Wellborn-spec 60mm and 80mm driveway pavers in stock on the truck for standard repair jobs, along with polymeric sand, bedding material, and edge restraint products. Unusual colors or larger full-driveway quantities may need a few days to source. We’ll confirm availability and lead time in the written quote, so there’s no waiting on a surprise at the door.
Written by Curtis Lane, Owner, Bradford Remodeling at Bradford Remodeling, serving Los Angeles and nearby areas.
Curtis Lane grew up in the Crenshaw district and trained in construction technology at Los Angeles Trade-Technical College on Washington Boulevard. Straight number, real scope, no surprises at the punch list. Call (903) 568-7222 for a free estimate on your Wellborn driveway or paver project.
