Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Fence Installation: The Los Angeles Owner’s Guide
Wellborn fence installation in Los Angeles typically runs $4,130 to $10,620 for a full perimeter or boundary fence, including materials, labor, and site cleanup. We keep a working inventory of Wellborn-compatible fence panels, posts, rails, and hardware on our trucks, so most installations in the Los Angeles area are completed within one to two days depending on lineal footage and terrain. The owners who call us usually have one of two problems: a fence that was never installed square or a failure from wind, soil movement, or sun exposure that has left panels leaning, posts cracked, or rails pulling away from the fence line.
What separates a good fence installation from one that fails early is the substrate work. In Los Angeles, that means clay-heavy soil in neighborhoods like Baldwin Hills and Leimert Park that expands and contracts with the seasons, plus Santa Ana winds that load posts with lateral force. Curtis Lane has watched too many fences fail because someone set posts in dry, uncompacted soil and called it a day. We don’t do that.
Which Wellborn Models This Applies To
Wellborn doesn’t manufacture fences as a standalone product line the way they produce cabinetry. The Wellborn name on a fence project usually refers to the fencing division specification or the contractor series they supply through builder channels. What matters to us is dimensional compatibility and how the existing fence was assembled. We work with cedar, redwood, pressure-treated pine, and composite fence systems that match Wellborn’s typical 6-foot and 8-foot panel heights, nominal 2×4 and 2×6 rail dimensions, and 4×4 and 6×6 post sizing.
The practical gotcha for Los Angeles homeowners is post depth. A 6-foot fence needs posts set 24 to 30 inches deep, not the 18 inches you see on quick-fix installs. A 6×6 post in clay soil that shallow will lean within two summers. When we arrive on site, we check the existing post spacing against the panel width and measure the actual rail span. Many aftermarket panels are sold as 8 feet but cut to 7 feet 10 inches, which means the installer has to shim or overhang the rails. We match OEM Wellborn-spec spacing when it applies, or we order panels cut to the exact width that fits your existing post layout. Aftermarket is fine when the material grade is equal; what you don’t want is a thinner gauge rail or a hollow post on a wind-exposed lot.
Styles & brands we work with
Signs Your Wellborn Fence Installation Is Failing
- Leaning posts at the property line. In Los Angeles clay, a leaning post almost always means it was set too shallow or the footing wasn’t wide enough. The soil at the base gives way on the tension side, and the post lists toward the pressure. Once a post passes about 10 degrees out of plumb, you’re not straightening it by re-tamping; it needs to be pulled and re-set.
- Rail separation or missing fasteners. High winds, especially in the corridor from the 405 to the 110, work fasteners loose over time. If you see a rail gap wider than a half-inch or nails backing out of a top rail, the connection has failed. That rail is carrying load it was never designed to carry.
- Sagging gate or binding latch. A gate that drags on the ground or won’t latch without lifting isn’t always the hinge’s fault. Usually the gate post has moved, or the gate frame was built with a single diagonal brace instead of a tensioned cross-brace. In Los Angeles, a metal gate frame installed on a wood post will also corrode at the mounting points faster than homeowners expect.
- Cracked or split posts. Sun and dry air pull moisture out of wood fast, especially on the east side facing the basin. A 4×4 post that checks and splits down the center is weakening. A split 6×6 holding a gate is a structural problem, not a cosmetic one.
- Soil washout at the base. Hillside properties and lots near the LA River see real runoff. Water moves soil away from posts and footings, and the fence starts to look like it’s standing on stilts. If you can see more than two inches of exposed footing, the post is no longer fully supported.
If the failure is the fence and not the finish, don’t wait for the next winter storm. A falling fence panel is a liability in a city where neighbors are close and wind gusts arrive without warning.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Los Angeles, a complete Wellborn-spec fence replacement runs $4,130 to $10,620 installed. The spread depends on lineal footage, material type (cedar costs more than pressure-treated pine, composite more than either), post size, terrain, whether old fence removal and disposal is included, and whether the existing footings can be reused. A 50-linear-foot flat-lot fence in Mid-City sits at the low end. A 150-foot fence wrapping a hillside lot with 6×6 posts, retaining adjacent wall work, and a double gate is at the top end.
Every quote we write for Los Angeles fence work includes the parts, the labor, the post concrete, the hardware, and the haul-away. No separate charge for fasteners, no surprise “soil condition” fee at the door. We give you the written price before any work starts, and that price doesn’t move unless the scope changes by your request. Every completed fence carries the 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge.
| Fence Type | Typical Installed Price (Los Angeles) |
|---|---|
| Pressure-treated pine (6 ft) | $4,130 – $7,080 |
| Cedar (6 ft, clear grade) | $5,900 – $9,440 |
| Composite / vinyl | $7,080 – $10,620 |
| Gate replacement (single, 4 ft) | $590 – $1,180 |
| Post re-set (per post, no concrete removal) | $235 – $470 |
These numbers reflect what we’ve actually charged across Los Angeles in the past twelve months. They’re real ranges, not brochure numbers. Call (903) 568-7222 and Curtis Lane or one of our field supervisors will walk the fence line with you and give you a fixed price in writing.
DIY or Call Us?
What an owner can safely check: post plumb with a 4-foot level, exposed footing depth, rail fastener tightness, and gate sag measured from the top rail. Those checks take ten minutes and tell us what we’re dealing with when you call. What goes wrong in DIY land is resetting posts without understanding what’s underneath. Los Angeles has irrigation lines, landscape lighting conduit, and in older neighborhoods like West Adams and Jefferson Park, abandoned gas or telecom lines that were never marked. Digging a new post hole next to a failed one without a utility locate is how fences turn into five-thousand-dollar repair bills. Setting a post in concrete and walking away from it same-day is how the failure happens all over again.
We respect a homeowner who wants to save where it’s smart. Fence installation is not that place. The margin between a fence that lasts fifteen years and one that leans by year three is in the footing, the brace, and the fastening pattern. If you’d rather spend a Saturday doing something else, call (903) 568-7222. We’ll give you a straight number for your exact fence line.
FAQs
A correctly installed cedar or pressure-treated fence with proper post depth and drainage should last 12 to 18 years in Los Angeles. The weak points are sun-cured wood movement, irrigation overspray, and soil shift. Call (903) 568-7222 if your fence is failing at year six or seven; that’s an installation defect, not normal wear.
If more than 30 percent of the posts are compromised, replacement is cheaper than piecemeal repair. Post re-sets run $235 to $470 per post, and once you’re pulling multiple posts the labor math tips. We’ll tell you straight which side of that line you’re on.
Most residential fence replacements are done in one to two days, including removal of the old fence, new post setting, panel and rail installation, and site cleanup. Larger lots or hillside work can run three days. Your written quote includes the day count.
We carry common rail and post sizes, standard gate hardware, and panel stock on our trucks for most Los Angeles service calls. If your fence requires a custom panel width or a specialty composite profile, we order it and schedule the install for the week it arrives. No homeowner is left waiting longer than needed.
For a fixed, written quote on Wellborn fence installation in Los Angeles, call Bradford Remodeling at (903) 568-7222. Curtis Lane will give you a straight number, a real scope, and no surprises at the punch list.
Written by Curtis Lane, Owner, Bradford Remodeling at Bradford Remodeling, serving Los Angeles and nearby areas.
