Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Parkway
Hiring a general contractor in Parkway means finding a crew that understands Sacramento County’s permit process, not just someone who can swing a hammer. Bradford Remodeling coordinates every Parkway job through the county’s Building Permits & Inspection Division, so your scope, permit set, and inspection sign-off run on the right timeline from day one. Our crews know the unincorporated parcels off Franklin Boulevard, the older housing stock near the I-5 corridor, and the way county plan review actually moves. If you’re planning a kitchen remodel, bathroom remodel, room addition, or whole-home renovation in Parkway, call (903) 568-7222 for a written price before any work starts.
Why Bradford Remodeling Is Parkway’s Preferred General Contractor Company
Parkway homeowners keep calling us for one reason: we put the price in writing before a single tool comes out. That’s The Garrison Standard. Every Parkway job we take gets a documented scope of work, a line-item price, and a signed guarantee at close-out. No numbers that move at the door.
Curtis Lane, our owner, runs every Parkway project the same way he’d run his own remodel: background-checked, uniformed technicians on site, a live person answering the phone day or night, and a written 365-Day Done Right Promise on the completed work. If something fails inside that year, we come back and correct it at no charge. Parkway residents have dealt with enough no-show contractors. We don’t operate that way.
Being part of the Garrison Partners family since 2004 means our Parkway jobs are held to a standard set at the corporate level, not left to whatever the crew decides that morning. Dispatch and scheduling are coordinated from the brand’s Sacramento office, so when you call about your Parkway project, you get a real answer about where your permit sits and when the inspector walkthrough is scheduled.
Styles & brands we work with
General Contractor Services in Parkway
General Contractor Services in Parkway cover the full run of remodeling work a Sacramento County home needs: kitchens down to the studs, bathrooms rebuilt with new rough-in plumbing, room additions that require county plan check, and whole-home renovations that pull multiple trades under one permit set. Most Parkway remodels fall into clear cost bands. A kitchen remodel runs $14,000 – $45,000, while a bathroom remodel lands at $9,000 – $28,000 depending on whether you’re moving the drain line or keeping the fixture layout.
Kitchen and Bath Scope Work
When we demo a Parkway kitchen, we check the subfloor at the sink base and the framing under the load-bearing wall. That’s where older county housing stock hides rot and undersized joists. A full kitchen with new cabinets, counters, and plumbing rough-in typically runs $14,000 – $45,000. A smaller kitchen with stock cabinets and no wall removal can land around $9,000 – $20,000.
Bathrooms in this area often need substrate work behind old tile. A full bath remodel with a tiled shower runs $9,000 – $28,000. If you’re only converting a tub to a walk-in shower, that’s $3,500 – $10,000. We include the rough-in inspection on every job that touches drainage or supply lines, so the county signs off before the walls close.
Room Additions and Structural Work
Room additions in Parkway typically start at $45,000 and can reach $130,000. That range covers foundation work, framing, roofing tie-ins, and the county plan check that comes with adding square footage to an existing parcel. The lot sizes in unincorporated Sacramento County vary parcel by parcel, which is why we verify setback requirements before we quote the job. Cabinet installation runs $4,000 – $13,000 depending on the line and how much custom fill work is needed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Construction Company in Parkway
Construction Company work in Parkway is different from a handyman patch job. You’re pulling permits through Sacramento County’s Building Permits & Inspection Division, scheduling inspections for rough-in and final, and coordinating multiple trades against a draw schedule that has to match the county’s plan review timeline. Our crews arrive in uniform, work from a written scope, and leave the site clean at the end of every day.
Permit and Inspection Coordination
Sacramento County handles all permitting for Parkway because it’s an unincorporated community, not a city. There is no city building department here. That means a Parkway remodel’s permit path runs through county plan review, and the inspection sign-off comes from a county inspector. A contractor quoting from the wrong jurisdiction’s playbook, assuming a city inspector and city code, can miss the correct inspection step and stall your project for weeks.
Draw Schedule and Rough-In Sequencing
We structure our Parkway jobs around the rough-in inspection. Before we order counter slabs or schedule paint, the county inspector signs off on the framing, electrical, and plumbing inside the open walls. Then the drywall goes up, and the remaining trades sequence behind it. Window replacement on a Parkway home runs $4,500 – $15,000, and we time that work around the county inspection calendar so you’re not waiting on a locked permit set.
Trusted Brands We Service in Parkway
We work with a documented roster of materials because a guarantee is only as good as the parts behind it. On Parkway jobs, we regularly install KraftMaid and Wellborn cabinetry, Cambria and Silestone counters, Kohler and Moen fixtures, and James Hardie exterior products. We also pull manufacturer specs on products like Sakrete and Cover when a project calls for exterior concrete work or a prefabricated ADU component. Every material gets documented in your written scope of work, so the specs are traceable before the first order goes in.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Parkway Homes
Here’s what we find when we walk Parkway properties:
- Unpermitted prior work: Many older Parkway homes have a kitchen addition or bathroom remodel that was never permitted. When you open the wall, we have to bring that work up to current code before the county signs off on the new scope. This adds scope, but it’s the only way to pass inspection.
- Soft subfloor panels at sink bases and toilet flanges: Decades of small leaks rot the substrate under the finish flooring. We catch it during demo and rebuild it before setting cabinets. Skipping this step means your new tile floor moves within a year.
- Undersized framing on load-bearing walls: The housing stock near the I-5 corridor runs older, and a lot of it was framed before current shear and bearing requirements. Removing a wall to open a kitchen means the county inspector will verify the header specification. We quote that work in the initial scope, not as a surprise change order.
- Guesswork on the draw schedule: A contractor who doesn’t check the county’s plan review timing can burn through your deposit before the permit is even issued. We tie every draw to a documented milestone: permit issuance, rough-in sign-off, final inspection. You pay in increments, not in blind installments.
Pricing for General Contractor in Parkway, CA
Here are the real numbers for Parkway general contractor work. These ranges come from completed projects in this Sacramento County market, not from a national estimator.
| Project | Parkway Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Home Addition | $45,000 – $130,000 |
| Window Replacement | $4,500 – $15,000 |
| Cabinet Installation | $4,000 – $13,000 |
What moves the price within those bands? Whether the county plan check flags a setback issue, whether the rough-in reveals rotted substrate or unpermitted framing, and whether you’re keeping the existing plumbing layout or moving a drain line. A Parkway kitchen that stays in the same footprint runs lower. A kitchen that opens a wall into a dining room runs higher. We give you a written line-item price before any work starts, so you see exactly what each trade costs. Call (903) 568-7222 for a free estimate on your Parkway project.
We Also Serve Cities Near Parkway
While this page covers General Contractor in Parkway specifically, our crews also run jobs in Los Angeles, San Diego, San Jose, and San Francisco. If your project sits outside Parkway proper, we’ll coordinate the permit path through whatever jurisdiction applies and keep the same written-price commitment. For the full service picture, see our General Contractor hub page.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Parkway
Yes. Parkway is an unincorporated community in Sacramento County, so permits come through the county’s Building Permits & Inspection Division, not a city building department. The county inspector signs off on the rough-in and the final for any structural, electrical, or plumbing work. A contractor quoting city code here is quoting the wrong rulebook. Call (903) 568-7222 and we’ll pull the correct permit path before any work begins.
Three things: the condition of the substrate under the finish surfaces, whether the county plan check flags a setback or code issue on the parcel, and whether you’re moving drain lines or load-bearing walls. Older Parkway homes routinely have unpermitted prior work and rotted subfloor panels at sink bases. We quote those risks in the written scope, not as an afterthought change order. A kitchen remodel in Parkway runs $14,000 – $45,000 depending on those variables.
A typical Parkway kitchen or bathroom remodel runs 6 to 10 weeks from permit issuance to final inspection, assuming the county plan review doesn’t have a backlog. Room additions can run 12 to 16 weeks because the plan check and inspections have more steps. We give you a calendar tied to actual milestones: permit issuance, rough-in sign-off, drywall, final inspection. If the county timeline shifts, we tell you on the phone, not in an email.
You sign a written change order before any added scope goes into the job. That’s how Bradford Remodeling operates under The Garrison Standard. No verbal agreement, no “while we’re in there” upgrade, no allowance creep. If we open a Parkway wall and find rotted framing, you get a written line-item price for the repair and a signature before we proceed. Call (903) 568-7222 and we’ll show you exactly what a written scope looks like.
Yes, and that’s often the only way to get a clean inspection sign-off from Sacramento County. We demo to the studs, bring the framing, electrical, and plumbing up to current code, and then rebuild with documented materials. Our crew handled a Parkway kitchen in the unincorporated county area off Franklin Boulevard exactly this way: we caught a soft subfloor panel at the sink base, rebuilt it, set KraftMaid cabinets and a Silestone island top, and the county inspector signed off on the rough-in and the final. The client got a written punch list before our final walkthrough. For a written price on your Parkway job, call (903) 568-7222.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Parkway, CA.
