Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose ECO Window Systems Construction
Bradford Remodeling provides Eco Window Systems repair in Los Angeles, from window replacement and impact installation to the framing and flashing work that keeps those units watertight. We work on ECO 7000, 3000, 9500, and 2000 Series windows weekly, which means we know the specific failure points Los Angeles climate throws at them, including salt-air roller seizure in coastal neighborhoods and UV-driven seal haze on south-facing glass. We are not an authorized ECO Window Systems dealer or warranty provider. We’re an independent remodeling crew that services their products because Los Angeles homeowners keep asking us to. If you have an ECO window that drags, fogs, or leaks, call (903) 568-7222 and we’ll give you a straight diagnosis and a written price before any work starts.
What separates our ECO Window Systems work from a generalist’s is simple: we know the profiles, the glazing specs, the track dimensions, and the retrofit flange details specific to each ECO series. A window that sticks in Glendale fails differently than one that sticks in Sherman Oaks. Salt air corrodes aluminum. Valley dust packs vinyl tracks. UV breaks down dual-pane seals. We diagnose the actual cause, not the symptom, and we put the repair or replacement scope in writing so you know exactly what you’re paying for and why.
Why Trust Bradford Remodeling for Your ECO Window Systems Construction?
Curtis Lane founded Bradford Remodeling on a principle he learned framing houses with his grandfather in Crenshaw: if the opening isn’t square, nothing you hang in it will ever work right. That’s the lens we bring to every ECO Window Systems job. A window that binds or leaks isn’t just a window problem. It’s often a framing, flashing, or drainage problem that the window is simply revealing. We look at the whole opening, from the rough sill to the exterior trim, because that’s where the real fix usually lives.
Our technicians work on ECO Window Systems products every week. We know the 7000 Series aluminum sliders use steel rollers that corrode in salt air. We know the 3000 Series vinyl single-hungs have weep channels that clog with LA dust and send water under the sash. We know the 9500 Series dual-pane units lose their seal on south- and west-facing exposures after eight to twelve years of sun. That product-specific knowledge means we arrive with the right parts on the truck, diagnose faster, and don’t sell you a replacement when a $40 roller set and a track cleaning solves the problem. Every job, from a single sash repair to full-home window replacement, carries a written price before work starts and the 365-Day Done Right Promise when we finish. If something fails within the year, we come back and make it right at no charge.
We’re part of the Garrison Partners family, established in 2004, and every project is held to The Garrison Standard: written scope, written price, background-checked uniformed technicians, and a live person answering the phone 24 hours a day. Not a callback queue. A person.
Styles & brands we work with
Common ECO Window Systems Construction Problems We Fix in Los Angeles
- 7000 Series aluminum sliders that drag or seize. The original steel rollers in ECO 7000 Series frames flatten and seize when salt air and dust pack into the bottom track. Coastal homes in Playa del Rey and San Pedro see it fastest, but Valley homes get it too, just from grit instead of salt. The sash starts dragging, then scratches the sill, then won’t move at all. We pull the sash, clean or grind the track, install OEM-spec nylon-tire rollers, and replace the pile weatherstrip so the window glides and seals again.
- Weep-hole and drainage-channel clogs on 3000 and 2000 Series vinyl units. ECO vinyl frames drain water through small weep holes at the bottom of the exterior track. Los Angeles dust, spider nests, and debris clog those holes, water backs up under the sash, and before you see any exterior sign, the interior drywall below the window stains. We clear the drainage channels, add weep-hole screens, and check the surrounding framing for rot while we’re in there.
- Factory seal failures on 9500 Series dual-pane glass. This is the fog you can’t wipe off. The seal between the glass panes fails, moisture gets in, and you see persistent condensation or a milky haze. On south- and west-facing Los Angeles exposures, UV and heat cycles typically kill those seals in eight to twelve years. There’s no field repair for a failed glass seal. The fix is new insulated glass or a new sash, and we’ll give you both prices and let you decide.
- Retrofit flange cracks on 2000 Series windows in older stucco homes. The 2000 Series is a retrofit window designed to mount into an existing frame without tearing out stucco. But on 1950s and 1960s LA houses, the original stucco shifts over decades, and the retrofit mounting flange takes the stress. The flange cracks, wind-driven rain gets behind it, and the unit eventually loosens. We see this most often on original-construction homes in the San Fernando Valley and Mid-City, where the stucco is old and the framing has settled. The fix is pulling the unit, repairing the opening, and reinstalling with proper flashing, not caulking over the crack and hoping.
- Drafty 3000 Series single-hungs with worn weatherstripping. The 3000 Series vinyl single-hung relies on a simple weatherstrip system at the meeting rail and jambs. After years of sun exposure, that weatherstrip compresses and dries out, leaving gaps you feel on windy days. We replace the weatherstrip with a matching profile, and if the sash has warped beyond what new weatherstrip can seal, we say so and quote a replacement sash instead.
ECO Window Systems Parts & Our Repair-vs-Replace Approach
We source OEM ECO Window Systems rollers, glazing gaskets, and sash locks whenever the profile is still supported by the manufacturer. For older discontinued ECO lines, we use verified aftermarket rollers and seals that match the original track dimensions exactly, not universal parts that sort of fit. A roller that’s a millimeter off width will bind. A gasket that’s too stiff won’t compress. We match the spec because that’s the difference between a repair that lasts and one you’re calling about again in six months.
Our repair-versus-replace rule is simple, and we apply it the same way to every job. If the glass seal is gone on a 9500 Series dual-pane unit, replacing the insulated glass is the fix, and we’ll tell you what that costs compared to replacing the full window. If a 2000 Series frame is cracked at the mounting flange, chasing repairs on a cracked frame is throwing money away. We’ll quote a replacement unit with proper flashing. If a 7000 Series slider just needs rollers and track work, we’ll never push a new window. Straight number, real scope, no surprises at the punch list. Call (903) 568-7222 for an exact quote on your specific windows.
Our ECO Window Systems Service Process – Step by Step
- 1
Diagnosis on site. We inspect the window, the track, the weep system, and the surrounding frame and drywall. We measure the opening and check for plumb, level, and square. If the problem is the window, we say so. If it’s the framing or flashing, we say that too.
- 2
Written scope and price. Before any work starts, you get a written price for parts and labor. No numbers that move at the door. No change orders because we missed something in the quote. The Garrison Standard means everything is in writing.
- 3
Repair or install. For repairs, we match OEM or spec-verified aftermarket parts and replace what’s worn or broken. For installations, we pull the old unit, repair and flash the opening properly, set the new window, shim it square, and insulate around the frame. On ECO 2000 Series retrofits, we inspect the existing frame and stucco before we mount anything to it.
- 4
Test and verify. We operate every sash, check the drainage, and verify the seal. On a 7000 Series slider, you should be able to open it with one finger. On a 9500 Series, there should be no haze and no draft. We don’t leave until the window works the way it was designed to.
- 5
Written guarantee in your hand. Every completed ECO Window Systems job carries the 365-Day Done Right Promise. If the repair or installation fails within one year, we come back and correct it at no charge. Clean site, documented scope, signed guarantee. That’s what squared away looks like at job close.
See the difference
Before
After
Before
After
Before
AfterECO Window Systems Products We Service & Install in Los Angeles
Our crews work on the full ECO Window Systems lineup that shows up in Long Beach homes. That includes the 7000 Series aluminum sliding windows, the 3000 Series vinyl single-hung windows, the 9500 Series vinyl horizontal sliders, and the 2000 Series retrofit double-hung windows. We service and install all four series, and we stock common rollers, weatherstrip, sash locks, and weep-hole screens for the 7000 and 3000 Series on our service trucks so same-visit repairs happen when the parts allow. For 9500 Series insulated glass replacements and full unit installs, we order to the exact size and glazing spec, which usually takes a few days to a week depending on manufacturer stock.
We also handle the construction work that goes around ECO windows: rough-opening repair, flashing, trim, stucco patching at the mounting flange, and the roofing tie-in work when windows are being replaced alongside a tile roof project. A window that leaks is often a flashing problem, and flashing is construction, not window service. We do both.
We Also Service These Brands
While ECO Window Systems is a core part of our window work, Bradford Remodeling is a full-service remodeling contractor, not a single-brand shop. We install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures alongside our window work, so a kitchen remodel with new ECO windows is one crew, one written scope, one guarantee. If you’re remodeling around your windows, we’d rather handle the whole opening, not just the glass.
FAQs – ECO Window Systems Construction Service in Los Angeles
The fog means the factory seal between the glass panes has failed, and there is no field repair that restores a failed dual-pane seal. You need either new insulated glass for the existing sash or a replacement unit. We’ll quote both. On 9500 Series windows with otherwise sound frames, replacing the insulated glass is usually the cheaper fix, but if the frame also shows wear or the hardware is failing, a full replacement often makes more sense. Call (903) 568-7222 and we’ll give you an exact price for your window sizes.
The Santa Ana winds carry fine dust and grit into the bottom track of your 7000 Series sliders, and that grit packs into the steel rollers until they flatten or seize. Once the rollers stop rolling, the sash drags directly on the aluminum track and scratches it. The fix is removing the sash, cleaning or grinding the track smooth, and installing new OEM-spec nylon-tire rollers. We also replace the pile weatherstrip since dust embeds in it. If the track is deeply scored, we’ll tell you whether it can be saved or whether a new window is the honest answer. Estimates are free.
No. Bradford Remodeling is an independent remodeling contractor, not an authorized ECO Window Systems dealer or warranty provider. We service and install ECO Window Systems products because Los Angeles homeowners ask us to, and because we’ve worked on their profiles for years. If you need a manufacturer warranty claim filed, we’ll help you understand what ECO requires and provide documentation of the work we performed, but the warranty itself belongs to ECO Window Systems, not to us. Our own 365-Day Done Right Promise covers our workmanship on every job.
We use OEM ECO Window Systems rollers, gaskets, and sash locks whenever the profile is still supported by the manufacturer. For older discontinued ECO lines, we source verified aftermarket parts that match the original track dimensions and material specs exactly. We’ll never install a universal roller that’s close enough, because close enough binds, squeaks, and fails. If you want OEM parts specifically, tell us and we’ll quote it that way, with the understanding that some discontinued hardware is only available aftermarket.
A typical roller replacement, weatherstrip job, or weep-hole clearing on a 7000 or 3000 Series window takes one to two hours per window once we’re on site. Insulated glass replacement on a 9500 Series unit depends on manufacturer stock, usually a few days to a week for the glass to arrive, then about an hour per sash to install. Full window replacement, including rough-opening repair and flashing, runs one to two days for a typical multi-window project. We’ll give you a written timeline with your written price before any work starts, and the 365-Day Done Right Promise guarantees the work for a full year.
Window replacement in Los Angeles runs $5,310 to $17,700 depending on window size, series, and how much framing or flashing work the opening needs. Impact window installation runs $9,440 to $29,500. Here are our current Los Angeles price ranges for the work we do alongside ECO window service:
| Service | Price Range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
| Roof Replacement | $9,440 – $23,600 |
| Tile Roof Repair | $710 – $2,950 |
Those are real numbers, not placeholders. Your exact price depends on your window sizes, which series you have, and what the openings need. Call (903) 568-7222 for a written quote, free.
Yes, and we coordinate the flashing and tie-in work so the window installation and the roofing work are sequenced correctly. The key is doing the window flashing before or properly integrated with the roof underlayment and tile, so water sheds away from the opening instead of behind the stucco. We’ve done this on tile roof replacements across Anaheim, and we handle the window-to-roof junction as one continuous waterproofing detail, not two separate jobs that don’t talk to each other. If you’re replacing a tile roof and windows in the same project, call us for a combined scope and a written price on both.
We stock common ECO 7000 Series rollers, 3000 Series weatherstrip, sash locks, and weep-hole screens on our service trucks so a single-visit repair happens whenever the parts match. For 9500 Series insulated glass and 2000 Series retrofit frame components, we order to spec and return to install once parts arrive. We’ll tell you before we show up whether we expect to complete the repair in one visit or two.
That depends on the series and condition. 7000 and 3000 Series windows with working rollers, good weatherstrip, and clear glass are usually worth keeping through a remodel, especially if the frames are square and the drainage works. 9500 Series units with failed seals should be replaced during the remodel while the walls are open, because doing it later costs more in labor and drywall. 2000 Series retrofits with cracked flanges should also go during a remodel, since the opening is already being worked. We’ll inspect each window during the walkthrough and give you a straight keep-or-replace recommendation with prices for both options.
Book Your ECO Window Systems Service in Los Angeles, CA
If your ECO windows drag, fog, leak, or draft, call Bradford Remodeling at (903) 568-7222. We’ll schedule a diagnostic visit, put the scope and price in writing, and stand behind the work with the 365-Day Done Right Promise. Curtis Lane and our Los Angeles crews know ECO Window Systems products because we work on them every week. You’ll get a straight number, a real scope, and windows that work.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Los Angeles since 2004.
