Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Irvine, CA | Bradford Remodeling
We provide independent Mr-Glass service across Irvine, from frameless shower enclosures to glass railing and partition kits. The one thing that makes our Mr-Glass work here different is that most Irvine homes from the 1980s and 1990s were framed for tub-and-curtain openings, not the wider clearances modern Mr-Glass systems need. So our work often starts with correcting the opening before the glass ever goes in. Curtis Lane and our General Contractor in Irvine know Mr-Glass hardware inside and out, and we serve every village in Irvine. Call (903) 568-7222 for a written estimate.
Why Irvine Residents Choose Us for Mr-Glass Service
Mr-Glass enclosures are precision systems. The glass, the hinges, the channels, the seals: all of it has to sit square or the door binds, the rollers wear, and water finds a way out. We’ve installed and serviced Mr-Glass frameless sliding doors, semi-frameless pivot enclosures, and custom glass panels across Irvine for years, which means we know how these systems behave in local bathrooms with hard water, tight ventilation, and original production framing.
We’re an independent remodeling and construction company, not a manufacturer-authorized service provider. That matters because it means we are not tied to any Mr-Glass warranty program. Our crew handles the fabrication, fit, and finish work ourselves, so we can stand behind the installation without pointing you to a manufacturer’s fine print. And we carry OEM-grade Mr-Glass hardware and seals whenever the original profile is still available, plus quality aftermarket hinges, gaskets, and channels when OEM parts are discontinued or back-ordered.
Curtis Lane, our owner, trained in construction technology at Los Angeles Trade-Technical College and spent two decades doing everything from foundation work to finish carpentry before Bradford Remodeling became his operation. His signature saying tells you how we operate: “Straight number, real scope, no surprises at the punch list.”
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Irvine
- Frameless shower doors that sag or bind at the pivot. Irvine’s hard water leaves mineral deposits that collect in hinge channels and pivot hardware. Over time, the door drops a few millimeters and drags on the curb. We pull the hardware, clean or replace the pivot assembly, and reset the glass so it swings clean. If the original hinges were undersized, we upgrade them.
- Semi-frameless enclosures with corroded aluminum frames. Irvine’s tight, well-sealed bathrooms trap humidity, and the bottom track of a semi-frameless Mr-Glass system takes the brunt of daily spray. We see pitting and white corrosion on aluminum tracks in homes across Irvine, especially in original bathrooms without exhaust upgrades. We replace the track, match the profile, and seal it properly.
- Tempered glass panels that chip or shatter at the edges. Production-build Irvine homes often had undersized glass clearances from the start. Wall framing shifts slightly over decades, and a panel that was too tight from day one eventually chips at the edge. We measure the actual opening, not the original spec, and cut the replacement with proper clearance.
- Seal failure and water migration behind Mr-Glass panels. When the original silicone was applied over dusty or damp substrates during a fast production-build installation, the bead fails and water wicks behind the glass. We strip the old seal, prep the surface correctly, and re-apply with the right curing time before the enclosure sees water again.
- Out-of-square openings that make any new Mr-Glass door hang crooked. This is the big one in Irvine. If the opening was framed for a tub-and-curtain setup, it wasn’t meant to carry a frameless glass door. We correct the framing or tile the opening to a true, plumb line before hanging the glass, so the door closes evenly and the seals compress correctly.
Mr-Glass Service in Irvine: What Local Conditions Mean for Your Equipment
Irvine’s residential construction is dominated by large master-planned villages built in specific waves, and homes from the 1980s and 1990s villages often have original bathroom layouts where the shower opening was framed for a tub-and-curtain setup, not the wider, taller clearances a modern Mr-Glass frameless enclosure needs. That means most Mr-Glass work we do here starts with reframing or tiling the opening as part of our Kitchen Remodeling - Irvine expertise, not just hanging glass. In Woodbridge, for example, we regularly see original second-floor bathrooms framed with stud spacing that was fine for a curtain rod but undersized for the point loads a frameless sliding door puts on the header. Northwood and Westpark homes from the same era have similar conditions. We correct the structure first, then install the glass so the system operates the way Mr-Glass designed it.
Mr-Glass Models & Products We Service in Irvine
We service and install Mr-Glass frameless sliding shower door systems, semi-frameless pivot and hinged shower enclosures, custom glass panel and mirror wall systems, and glass railing and partition kits for residential remodels. If your enclosure uses Mr-Glass soft-close or pivot hardware, we match the original profile with OEM-grade parts whenever they’re still available. When an older profile has been discontinued, we use quality aftermarket hinges, gaskets, and channels that match the original dimensions and load rating. We keep common Mr-Glass hardware, seals, and roller upgrades stocked locally so Irvine service doesn’t wait on a warehouse across the country.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Irvine
Here are the price ranges you can expect for Mr-Glass work in Irvine. These are written, line-item estimates before any work starts, never a vague ballpark.
| Service | Price Range |
|---|---|
| Walk-In Shower Installation (Mr-Glass enclosure) | $4,500 – $12,000 |
| Shower Replacement (glass and hardware only) | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Tile & Fixtures (shower surround refresh) | $800 – $2,500 |
What drives the cost in Irvine is usually the condition of the opening, not the glass itself. If the framing is square and the curb is level, a glass-only replacement runs on the lower end. If we’re correcting framing, re-tiling the curb, and rebuilding a threshold, the number moves up accordingly. Every estimate includes the scope, the materials, and the labor, in writing. Call (903) 568-7222 and we’ll give you the exact number before any work begins.
Serving Irvine, CA - Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Irvine
Yes, in most cases you can replace just the glass panel and keep the existing hardware and surrounding tile, as long as the frame, hinges, and track are still sound and the opening is square. We measure the actual opening and order the panel to fit precisely. If the hardware is worn or corroded, we’ll tell you whether replacing the glass alone makes sense or if new hinges and rollers should go in at the same time. Call (903) 568-7222 and we’ll assess your specific enclosure.
The usual cause in Irvine homes is mineral buildup from hard water collecting in the hinge channels, combined with slight seasonal or structural movement in the wall framing. The pivot assembly gets tight, the door drops a few millimeters, and it drags on the curb or swings open on its own. We clean or replace the pivot hardware and reset the glass on a plumb line so it swings evenly. If the wall behind it is out of square, we correct that before re-hanging the door.
Yes, and this is one of our most common jobs in Irvine. The original 1980s villages, like Woodbridge, Northwood, and Westpark, were largely framed for tub-and-curtain bathrooms, not the wider and taller openings a modern Mr-Glass frameless enclosure requires. We reframe or tile the opening to the correct clearance, then install the enclosure so it operates properly. The shower gets a modern update without a full bathroom gut.
It comes down to the frame and the glass, not the seals. If the glass is intact and the frame is structurally sound, a targeted repair, new hinges, new rollers, new seals, is usually the right call. If the glass is cracked, the aluminum frame is corroded through, or the hardware has wallowed out the mounting points, replacement is the honest long-term answer. We’ll give you a straight read on which one your enclosure needs. Call (903) 568-7222 for an inspection and a written estimate.
In Irvine, a Mr-Glass shower enclosure or glass-and-hardware replacement typically runs between $3,000 and $12,000, depending on the enclosure size, glass thickness, hardware style, and whether the opening needs structural correction. A basic glass-and-hardware swap starts around $3,000. A full walk-in enclosure with a corrected opening and new tile work can reach $12,000. Call (903) 568-7222 for a written, line-item quote, no numbers that move at the door.
Service Areas Near Irvine
Beyond Irvine, our Irvine service area covers nearby communities where we provide Mr-Glass sales & service. We also handle Mr-Glass work in Mr-Glass service in Santa Ana and Mr-Glass service in Chula Vista, along with Los Angeles and San Diego county calls. If you’re unsure whether we reach your neighborhood, call and ask.
Book Your Mr-Glass Service in Irvine Today
If you’ve got a Mr-Glass shower door that binds, leaks, or just doesn’t close right, let’s get it squared away. Call Bradford Remodeling at (903) 568-7222 and we’ll schedule a free estimate. Curtis Lane and our crew will come out, measure the opening, and give you a straight number in writing before any work starts.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Irvine since 2004.
