Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Santa Ana, CA | Bradford Remodeling
We’re Bradford Remodeling, a Santa Ana General Contractor that installs, repairs, and replaces Mr-Glass shower enclosures, mirrored cabinets, and glass systems across Santa Ana. Our crew works on Mr-Glass units in homes built from the 1920s through the 2000s, and we know the exact failure points Santa Ana water and older framing create. Call (903) 568-7222 for a written quote before any work begins.
We are not a factory-authorized Mr-Glass dealer. We’re a remodeling contractor that has solved real-world Mr-Glass installation problems in Santa Ana’s older housing stock for years, from out-of-square 1950s frames to post-1990 tract homes. That independence means we recommend the repair that makes sense, not the replacement that pads an invoice. Curtis Lane, our owner, trained in construction technology at Los Angeles Trade-Technical College and spent two decades running foundation work and finish carpentry before Bradford Remodeling became his operation. He signs off on every Mr-Glass scope we write in Santa Ana.
If you’re researching Mr-Glass service in this city, see Mr-Glass sales & service for the full breakdown of what we handle across Orange County, or visit our Santa Ana service area page to see where we work locally.
Why Santa Ana Residents Choose Us for Mr-Glass Service
Most Mr-Glass shower doors in Santa Ana fail because of two local facts: hard water and out-of-plumb walls. A generic glass company can replace a panel. We diagnose why a door binds, corroded, or shifted in the first place, then fix the underlying framing issue before re-hanging the glass. That’s the difference between a repair that lasts and one that pinches again in eight months.
Every Mr-Glass job we run in Santa Ana starts with a written price. No numbers that move at the door, no vague allowances. Our 365-Day Done Right Promise covers every completed Mr-Glass installation and repair for a full year in writing. If the door binds, the rollers seize, or the glass shifts out of square inside that window, we come back and correct it at no charge. That guarantee is part of The Garrison Standard, the framework every Garrison Partners location has operated under since 2004.
Our technicians are background-checked and uniformed. You’ll know who’s walking through your door before they arrive. And when you call, a live person answers, 24/7. No voicemail tree between you and a straight answer about your Mr-Glass enclosure.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Santa Ana
- Sliding door rollers flatten or seize. Santa Ana’s hard water leaves mineral deposits that grind into the nylon rollers on Mr-Glass sliders, especially the 1/4-inch and 3/8-inch frameless units common in 1970s – 1990s condos. The panel jumps the track or binds halfway. We replace rollers with OEM Mr-Glass parts when available and clean the track channel so the door glides again.
- Semi-frameless pivot hinge corrosion. Interior bath humidity is high in Santa Ana, and many older single-story homes near downtown lack exhaust fans. The pivot pin on Mr-Glass semi-frameless doors corrodes and seizes. We replace the pin and hinge assembly with OEM-spec parts and check the jamb for plumb before re-hanging.
- ClearMax coating breakdown from abrasive cleaners. Santa Ana’s mineral-heavy tap water tempts homeowners to scrub with abrasive products. ClearMax-style coatings etch and leave spotting that looks like permanent glass damage. We can often polish the glass back to clarity, or replace the panel if the coating has failed completely.
- Frameless enclosures shifting out of plumb. Santa Ana’s older homes sit on pier-and-beam or post-tension slabs that have settled. When the surrounding tile or slab moves, a Mr-Glass frameless enclosure shifts, and the door gap opens or the panel binds. We shim the wall channel with solid blocking and re-hang the glass square.
- Out-of-square rough openings on 1920s – 1950s homes. Nothing in a 1940s bungalow is square. A Mr-Glass pivot door hung on an out-of-plumb jamb will drag and stress the hinges. We check wall plumb with a laser before any install and correct the framing or use solid blocking to true up the channel.
Mr-Glass Service in Santa Ana: What Local Conditions Mean for Your Equipment
Santa Ana has a high concentration of 1920s – 1950s single-story homes on raised foundations and 1960s – 1980s tract homes with original cast-iron drains. Both conditions shape how Mr-Glass shower glass behaves here. A raised foundation settles, and every fraction of an inch shows up in the shower: the jamb leans, the glass rack, the pivot hinge binds. Original cast-iron drains are another issue. By the time a homeowner wants a tub-to-shower conversion with a Mr-Glass door, that drain is often scaled or corroded, and the pan slope may have flattened. We check wall plumb and drain condition before we hang a Mr-Glass enclosure. In the Wilshire Square neighborhood, a 1940s bungalow had a Mr-Glass semi-frameless pivot door that had been dragging for months. The bottom pivot had rusted solid and the jamb was 3/8 inch out of plumb from old settling. We removed the door, replaced the pivot hinges with OEM-spec parts, shimmed the wall channel with solid blocking, and re-hung the glass square. The homeowner kept the original Mr-Glass panel and saved the cost of a full enclosure replacement.
No other city in Orange County has this exact mix of raised-foundation bungalows and cast-iron drain systems in the same concentration. A generic glass installer that doesn’t check framing before hanging glass will fight this problem for years and never solve it. We solve it on the first visit.
Mr-Glass Models & Products We Service in Santa Ana
We work on the Mr-Glass product lines most commonly installed in Santa Ana homes. The Mr-Glass Frameless Sliding Shower Door in both 1/4-inch and 3/8-inch glass is the stock unit in 1970s – 1990s condos across the city. The Mr-Glass Semi-Frameless Pivot Shower Door shows up in 1990s – 2000s tract homes with standard 60-inch tub/shower alcoves. We also install and service Mr-Glass Custom Frameless Enclosures with ClearMax or similar coating for homeowners upgrading builder-grade glass, and the Mr-Glass Mirrored Medicine Cabinet and vanity mirror series standard in Santa Ana hall baths and powder rooms.
On parts, we use OEM Mr-Glass rollers, hinges, seals, and handles whenever they’re available. When OEM parts are discontinued, we source high-quality aftermarket equivalents and tell you which one we’re using and why. If a repair solves the problem for a fraction of replacement cost, we recommend the repair first. But if a frame is too far gone to re-hang safely, we’ll tell you that directly and show you the numbers for a replacement. Straight number, real scope, no surprises at the punch list.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Santa Ana
Here’s what Mr-Glass work runs in Santa Ana, based on current Orange County labor and material rates. These are written ranges, not vague estimates. Your exact number depends on the condition of your framing, the Mr-Glass product line, and what we find when we open the wall.
| Service | Price Range |
|---|---|
| Walk-In Shower Installation (including Mr-Glass enclosure) | $4,500 – $12,000 |
| Tub-to-Shower Conversion (glass door add-on) | $3,500 – $10,000 |
| Shower Replacement (glass and door component) | $3,000 – $8,500 |
| Bathroom Vanity Installation (with mirrored cabinet) | $800 – $3,000 |
Cost drivers in Santa Ana include wall-plumb correction on older homes, drain replacement if the original cast iron has failed, and the Mr-Glass panel size and glass thickness. A free estimate from us includes a laser check of the shower opening, a written scope of work, and a fixed price. Call (903) 568-7222 to schedule yours.
Serving Santa Ana, CA - Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Santa Ana
Yes. We replace Mr-Glass rollers on sliding shower doors throughout Santa Ana, and this is one of our most common repairs. The job typically takes under two hours, including removing the panel, cleaning the track channel, installing OEM-spec rollers, and re-hanging the door. If the track itself is worn, we’ll tell you during the estimate. Call (903) 568-7222 for a fixed quote.
Usually not. Santa Ana’s hard water etches the ClearMax-style coating on Mr-Glass enclosures, which looks like permanent glass damage but often isn’t. We can polish the coating back to clear in many cases, or replace the panel if the coating has broken down completely. Either way, we’ll give you the price for both options before you decide. Call (903) 568-7222 and we’ll assess it on site.
Yes, and most of our Mr-Glass installations in Santa Ana involve walls that are out of plumb. We check the opening with a laser, correct the framing with solid blocking or shims, and hang the Mr-Glass panel square. The written quote includes any framing correction needed, so the number doesn’t change once we start. Call (903) 568-7222 for a free estimate.
Most tub-to-shower conversions with a Mr-Glass door take four to seven working days in Santa Ana, depending on drain condition and whether we’re replacing a cast-iron drain line. We also offer Kitchen Remodeling - Santa Ana homeowners can bundle with bathroom work. We pull permits when the scope requires it and schedule the work in a single sequence so your bathroom isn’t torn apart longer than necessary. Call (903) 568-7222 for a timeline specific to your bathroom.
No. We are an independent remodeling contractor, not a factory-authorized Mr-Glass dealer. That independence is deliberate. We recommend repair over replacement when it makes sense, and we use aftermarket parts only when OEM parts are discontinued. Our accountability to you is the 365-Day Done Right Promise, a written guarantee that covers every Mr-Glass job we complete for a full year.
Service Areas Near Santa Ana
Beyond Santa Ana, we run Mr-Glass service calls in surrounding Orange County cities and across Southern California. Our crew works regularly in Tustin, Orange, Garden Grove, and Anaheim. For Mr-Glass work further south, see Mr-Glass service in Chula Vista. For work in South Florida, see Mr-Glass service in Hialeah.
Book Your Mr-Glass Service in Santa Ana Today
If your Mr-Glass shower door is binding, corroded, or shifted out of square, call us at (903) 568-7222. We’ll schedule a free estimate, check the opening with a laser, and hand you a written price before any work starts. Same-day visits are available for sliding door roller failures and pivot hinge seizures when our schedule allows.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Santa Ana with independent Mr-Glass service and written-price construction work. We also provide Mr Glass service in Garden Grove and nearby communities.
