Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Santa Rosa, CA | Bradford Remodeling
Bradford Remodeling provides independent Unilock paver and retaining wall installation, repair, and re-leveling across Santa Rosa. We’re not factory-authorized, and that’s deliberate: we pair Unilock’s pavers with base, drainage, and edge restraint specs that actually hold up in Sonoma County’s expansive adobe clay. If your driveway or patio is heaving, separating, or blooming white, call (903) 568-7222 for a written estimate before work starts.
Why Santa Rosa Residents Choose Us for Unilock Service
We’ve installed Unilock systems on Santa Rosa driveways, patios, and retaining walls long enough to know that what works in Petaluma doesn’t always survive a Rincon Valley wet season. The soil here moves. Curtis Lane, our owner, trained in construction technology at Los Angeles Trade-Technical College and spent two decades on foundation and finish work before Bradford Remodeling became his operation as a General Contractor in Santa Rosa. That background matters when your paver base is failing because someone skimped on aggregate depth. We write every scope in plain trade terms, give you a flat-rate bid that doesn’t creep, and back the finished job with our 365-Day Done Right Promise. If it doesn’t hold for a full year, we return and correct it at no charge.
Independent status means we answer to you, not to a manufacturer’s sales quota. We source genuine Unilock units through our supplier network but use premium aftermarket polymeric sand and edge restraints, because the sealants and restraints specified for other markets don’t hold Sonoma County’s clay. You get brand-name pavers with a base built for this ground, not a generic spec sheet.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Santa Rosa
- Efflorescence bloom on Brussels Block and Beacon Hill Flagstone. Santa Rosa’s wet-dry winter cycles push mineral-rich moisture up through the pavers, leaving a chalky white film. We clean it and reseal, or replace units where the bloom has etched the surface.
- Edge restraint separation on paver driveways. Adobe clay swells in winter rain and contracts through the dry summer. Cheap plastic edging pulls loose and pavers wander outward. We reset with commercial-grade spikes and restraints sized for soil movement.
- Cracking on mortared Tribeca Cobble and travertine patios. When installers set these units over bare soil, the clay’s shrink-swell cycle cracks the mortar joints within a season or two. The fix requires pulling the surface, adding a compacted Class II base, and resetting.
- U-Cara retaining wall lean and shift. Hillside lots across Santa Rosa, from Fountaingrove to Bennett Valley, put real lateral pressure on retaining walls. Walls built without geogrid reinforcement start leaning after the first heavy winter. We rebuild with proper grid layers and drainage.
- Rutting and settlement on paver driveways. Two inches of base might work in a dry climate. It fails here. We regularly see driveway pavers sinking near the garage apron where water pools and clay softens. The correction is always deeper base, not more sand.
Unilock Service in Santa Rosa: What Local Conditions Mean for Your Equipment
Santa Rosa’s expansive adobe clay is the factor that separates a ten-year paver driveway from a three-year headache. This soil swells when the winter rains arrive and contracts when the summer heat bakes it dry, sometimes moving several inches across a single driveway. Most California markets don’t spec for that kind of movement. Santa Rosa does not give you a choice. A Unilock install here needs a deeper Class II aggregate base, typically six inches or more under driveways, with geogrid reinforcement on slopes and in any area that sees vehicle traffic. Skip it and the pavers heave, the edge restraint pops, and the pattern drifts. We’ve torn out enough failed installs along Hoen Avenue and in the Coffey Park rebuild area to know what the absence of proper base looks like after two wet winters. It looks like a patio that’s shifted three-quarters of an inch off its original lines.
Unilock Models & Products We Service in Santa Rosa
We install and repair the Unilock lines that perform well in Sonoma County’s climate and soil conditions, including for any Santa Rosa Kitchen Remodeling projects that extend to adjacent patios and walkways. Brussels Block is a workhorse for driveways where tumbled edges hide minor movement. Beacon Hill Flagstone suits patios and walkways with its irregular, natural stone profile. Tribeca Cobble gives a tighter, more formal finish for covered entries and pool decks. The U-Cara Wall System is our standard recommendation for retaining walls under forty inches where grades need a clean face. We keep common Brussels Block and U-Cara units in local supply rotation, and our parts approach splits the difference honestly: genuine Unilock pavers, aftermarket joint sand and restraint hardware, because the best sand for Santa Rosa clay is not always the one with the Unilock logo on the bag. When existing pavers can be re-leveled and re-sanded instead of replaced, we tell you, usually saving 40-60% over a full tear-out.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Santa Rosa
What you pay depends on square footage, site access, base depth, and whether we’re repairing or replacing. Here’s where Santa Rosa pricing typically lands:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Every estimate includes a written line-item scope before any work starts. You’ll see exactly what the base depth is, what the drainage plan is, and what the finish spec covers. No numbers that move at the door. Call (903) 568-7222 to schedule a free estimate and we’ll walk the site with you.
Serving Santa Rosa, CA - Our Local Coverage Area
We’re based in the Santa Rosa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Santa Rosa
Yes, in most cases the City of Santa Rosa requires a permit for driveway replacement or new hardscape over a certain square footage, especially where stormwater runoff or right-of-way access is involved. We handle the permit paperwork as part of the job and pull it before excavation starts. Call (903) 568-7222 if you want us to check your specific address.
For driveways, we spec a minimum of six inches of compacted Class II aggregate base with geogrid reinforcement, over compacted native subgrade. Patios and walkways get a four-inch base as a floor. Anything less on expansive adobe clay risks heaving and separation within two winters. That depth is not a suggestion, it’s the floor for our warranty.
Unilock pavers are color-through, so surface wear does not expose a gray core the way painted concrete does. Cracking is almost always a base failure, not a paver failure. Units set on properly compacted Class II aggregate with working drainage handle Santa Rosa’s temperature swings without structural cracks. Call (903) 568-7222 for a site inspection if you’re seeing cracks and want to know whether the base or the pavers are the problem.
We can source the same Brussels Block color line, but a few years of Sonoma County sun and rain will have slightly muted the original units. A careful blend of new units across the repair area reads better than a hard patch line. We’ll show you a dry layout before we commit to the order. Call (903) 568-7222 to get an exact quote.
We excavate behind the wall, install the U-Cara units on a compacted base with proper buried course depth, and then layer geogrid reinforcement horizontally back into the hillside at specified vertical intervals. Drainage gravel and a perforated drain pipe go behind the wall so water pressure doesn’t build during the rainy season. On hillside lots in Fountaingrove, this is standard practice, not an upgrade. Call (903) 568-7222 for a wall assessment.
Service Areas Near Santa Rosa
Bradford Remodeling serves homeowners throughout Sonoma County, including Windsor, Rohnert Park, Sebastopol, Petaluma, and Healdsburg. We also run Unilock sales & service for clients across our broader Santa Rosa service area. For projects further south, see Unilock service in Rancho Cucamonga or Unilock service in Oceanside.
Book Your Unilock Service in Santa Rosa Today
Get a written price before any work starts. Call (903) 568-7222 and a live person answers, 24/7. We’ll schedule your free estimate, walk the site, and give you a straight number on the spot. Straight number, real scope, no surprises at the punch list.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Santa Rosa since 2004.
