Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Mr-Glass Construction
Bradford Remodeling provides Mr Glass repair in Los Angeles, from shower enclosure repair to full frameless glass installation. We buy Mr-Glass products directly, tear them out when they fail, and understand exactly how they’re built. That means our repair work targets the real problem the first time, not the symptom. Call (903) 568-7222 for a written estimate on any Mr-Glass service in Los Angeles.
Mr-Glass shower enclosures, particularly the frameless and semi-frameless lines sold through Lowe’s, are common fixtures in Los Angeles bathrooms. We see them in everything from 1920s bungalows in Highland Park to newer condo builds in Mid-City. The enclosures themselves are solid mid-range products. What fails is usually the installation substrate: the blocking behind the tile, the slope of the curb, the rollers that fight against LA’s hard water. Our crews know these products well enough to diagnose a Mr-Glass enclosure in under thirty minutes and quote the fix honestly.
We are an independent Mr-Glass service provider, not an authorized dealer or manufacturer affiliate. That independence matters. We don’t answer to a factory quota, so if a repair is the right call, we say so. If the enclosure is better replaced, we tell you straight.
Why Trust Bradford Remodeling for Your Mr-Glass Construction?
Curtis Lane grew up in the Crenshaw district and spent weekends watching his grandfather patch stucco and re-frame a back bedroom that never quite stayed square. That’s probably why he’s been obsessed with getting the framing right ever since. He trained in construction technology at Los Angeles Trade-Technical College on Washington Boulevard, then spent nearly two decades doing everything from foundation work to finish carpentry across the Basin. These days Bradford Remodeling is his operation, and he’s known around Los Angeles for clear scopes of work, flat-rate bids that don’t creep, and the kind of demo-to-drywall sequencing that keeps a job moving without surprises.
Our technicians work on Mr-Glass enclosures weekly. They know the extrusion profiles of the hinged and sliding lines, they recognize the specific roller assemblies used in the bypass tub doors, and they understand which hinges Mr-Glass specs for frameless glass. That product familiarity means faster diagnostics and fewer return trips. We use Mr-Glass OEM replacement rollers, hinges, seals, and sweeps when the glass and frame are structurally sound. We don’t substitute generics that “kind of” fit, because a roller that doesn’t match the extrusion profile will bind, jump, or wear out twice as fast.
Bradford Remodeling has been part of the Garrison Partners family since 2004, independently owned and operated, and every job is held to The Garrison Standard. Before any work starts, you get a written price. After the work is complete, you get the 365-Day Done Right Promise in writing: if the repair or installation fails within a full year, we return and correct it at no charge.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Los Angeles
Los Angeles hard water and bathroom humidity hit shower enclosures harder than most people realize. These are the issues we see most often on Mr-Glass products in LA homes:
- Bottom track corrosion on sliding doors. The Mr-Glass Bypass Sliding Tub/Shower Doors and Semi-Frameless Sliding enclosures have aluminum bottom tracks. In Los Angeles, where municipal water runs hard and daily showers leave moisture sitting on the track, mineral scale builds up fast. That scale traps water, the aluminum starts to pit, and the rollers drag. Homeowners notice the door getting harder to slide over months. We clean or replace the track, address the slope if water isn’t draining toward the pan, and replace the rollers with OEM parts.
- Roller bearing failure in top-hung bypass doors. The nylon wheels inside Mr-Glass bypass assemblies crack over time, especially when the door is a few thousand open-close cycles in. The symptom is a door that sags, scrapes, or jumps off the rail. The cause is usually small plastic bearings wearing flat. We replace the roller cartridges, adjust the door height, and check the top rail alignment so the new rollers aren’t carrying weight unevenly.
- Hinge sag on frameless glass doors. The Mr-Glass Frameless Shower Door systems, including the hinged enclosures, are heavy glass panels anchored through hinge plates into the wall. When the original installer anchored those hinges into tile-over-greenboard instead of a proper wood stud or blocking, the screws slowly wallow out. The glass drops out of alignment, the door won’t latch, and water starts escaping. We pull the hinges, add blocking behind the wall, and re-anchor everything correctly. The glass is usually fine; the framing behind it is the problem.
- Deteriorated seal strips and sweeps on older enclosures. Factory vinyl seals and sweeps on Mr-Glass enclosures dry out and crack after several years in a hot Los Angeles bathroom. When the sweep goes, water runs under the door and soaks the baseboard and cabinetry adjacent to the shower. We replace the seals with Mr-Glass OEM parts and check the curb for proper pitch. If the adjacent framing has already started to rot, we address that before it spreads.
- Improperly sloped curbs causing standing water. This isn’t a Mr-Glass part failure, but it’s the most common cause of recurring leaks we find behind Mr-Glass enclosures in older Los Angeles homes. If the curb wasn’t sloped toward the pan during original construction, water pools against the track or the glass and eventually migrates under the enclosure. We rebuild the curb with the correct pitch, set the new enclosure on top, and the leak stops for good.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We stock Mr-Glass OEM replacement rollers, hinges, seals, and sweeps locally, which means no weeks-long wait on parts when your shower door is dragging or leaking. We don’t use aftermarket tracks or rollers because those components rarely match the Mr-Glass extrusion profile. A generic roller that doesn’t seat correctly will bind on the rail, pop out of the track, or chew through the new seal within months. That’s not a fix; it’s a temporary quiet down. We’d rather do it right once.
Repair makes sense when the glass is intact, the frame extrusion is solid, and the wall blocking is sound. That’s most jobs we see. We replace the worn parts, adjust the alignment, and you get years more life out of the enclosure. We also recommend replace when the situation calls for it: chipped or scratched tempered glass, a frame extrusion that’s corroded through, or a shower that was built without proper backing so every hinge eventually fails. In those cases, Anaheim Mr Glass service with a new enclosure installed correctly is less expensive than chasing recurring repairs. Call (903) 568-7222 and we’ll give you an honest assessment and a written price either way.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the full enclosure: glass condition, frame extrusion, rollers, hinges, seals, and the wall blocking behind the tile. We check curb slope and pan drainage, because a leaking Mr-Glass door is often a shower construction problem, not a door problem.
- 2
Repair or install. For repairs, we use Mr-Glass OEM parts that match the existing extrusion. For installations, we set new Mr-Glass enclosures over properly sloped curbs with hinges anchored into wood blocking, never tile-over-greenboard.
- 3
Test. We run the door through its full range of motion, check for binding or sag, and run water across the seals to verify no leaks at the joints or threshold. If a drop gets where it shouldn’t, we adjust before we leave.
- 4
Warranty handoff. You get a signed written guarantee under the 365-Day Done Right Promise. The site is cleaned, the old parts are gone, and the written price you agreed to is what you paid.
Mr-Glass Products We Service & Install in Los Angeles
Our crews work on the full Mr-Glass shower enclosure lineup, including Mr Glass service in Glendale and surrounding areas. That includes the Frameless Shower Door systems (hinged and sliding enclosures commonly sold through Lowe’s), the Semi-Frameless Sliding Shower Door enclosures, the Neo-Angle and Corner Shower Enclosures that fit compact LA bathrooms, and the Bypass Sliding Tub/Shower Doors often found in older condos and rental conversions. We keep common Mr-Glass rollers, seals, and sweeps in local stock for faster turnaround. Bring us your model information and we can confirm part compatibility before scheduling.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Bradford Remodeling is a multi-brand contractor. Beyond Mr-Glass, we install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures. If your bathroom project touches more than the shower enclosure, one crew handles the whole scope. That means one written price, one warranty, and one crew accountable for the result.
FAQs – Mr-Glass Construction Service in Los Angeles
No. We are an independent Mr-Glass service provider. We buy Mr-Glass products directly and install or repair them using OEM parts, but we are not an authorized dealer or manufacturer affiliate. That independence lets us tell you honestly when a repair is the right call and when a different product would serve your Los Angeles bathroom better.
Yes, we use Mr-Glass OEM replacement rollers, hinges, seals, and sweeps whenever we’re repairing an existing enclosure where the glass and frame are sound. Aftermarket parts rarely match the extrusion profile and cause binding or premature wear. If OEM parts are discontinued and a quality match isn’t available, we’ll tell you before we order anything.
In most cases, yes. If the glass is intact and the frame extrusion isn’t corroded through, we replace the OEM rollers and seals, adjust the door alignment, and you’re done. The job typically takes a few hours. If the track is pitted or the wall blocking is compromised, replacement becomes the better value. We’ll quote both options in writing before any work starts.
Usually an installation problem. Frameless glass is heavy, and if the original installer anchored the hinges into tile-over-greenboard instead of a wood stud or blocking, the screws loosen over time and the glass drops out of alignment. The glass itself is rarely damaged. We remove the hinges, add proper blocking behind the wall, re-anchor everything, and realign the door. Call (903) 568-7222 for a free estimate on the fix.
It depends on the condition of the existing tile, curb, and wall framing. We can install Mr-Glass enclosures over solid existing tile when the curb slope is correct and the wall backing is adequate. If the tile is loose, the curb is improperly sloped, or the framing behind the wall is compromised, we’ll recommend addressing those issues first. Setting a new enclosure over a failing substrate is how the last leak started.
Yes. Los Angeles municipal water is hard, which means high mineral content. That mineral scale builds on the aluminum bottom track of Mr-Glass sliding enclosures, traps moisture against the metal, and accelerates pitting. We see it most in bathrooms that stay steamy and in homes that skip squeegeeing or drying the track after showers. Regular track cleaning slows it down, but once the pitting starts, the rollers drag and the problem compounds. Call (903) 568-7222 and we can assess whether your track needs cleaning, replacement, or a full rebuild.
Mr-Glass Construction Pricing in Los Angeles
| Service | Los Angeles Price Range |
|---|---|
| Frameless Glass Shower Enclosure (Walk-In Shower Installation) | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Shower Replacement | $3,540 – $10,030 |
These are the ranges we quote across Los Angeles for Mr-Glass shower work. The final number depends on glass size, frame style, whether we’re also rebuilding the curb or adding wall blocking, and your bathroom’s existing plumbing and tile condition. You get a written line-item price before any work starts. No numbers that move at the door. Call (903) 568-7222 for an exact quote on your project.
Book Your Mr-Glass Service in Los Angeles, CA
Straight number, real scope, no surprises at the punch list. Call Bradford Remodeling at (903) 568-7222 for your free Mr-Glass estimate in Los Angeles. We’ll diagnose the issue, put the price in writing, and stand behind the work for a full year.
Written by Curtis Lane, Owner at Bradford Remodeling, serving Los Angeles since 2004.
